Difference between revisions of "Tiny210"

From Geeetech Wiki
Jump to: navigation, search
(Software)
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
+
*[[Tiny210 Overview]]
== Overview ==
+
*[[Tiny210 Hardware Specification]]
* 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
+
*[[Creating the SD boot card]]
* 512MB DDR2 RAM and 1GB NAND Flash
+
*[[System Installing]]
* LCD/Touch Screen, HDMI,TV out, Audio support
 
* TF card, USB Host/OTG support
 
* Ethernet, WiFi, serial port, GPIO
 
* Contain CPU board
 
* Linux 2.6.35 & Android 2.3 support
 
 
 
 
 
== CPU board Hardware info ==
 
CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
 
 
 
DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz
 
 
 
FLASH: SLC NAND Flash: 256MB/1GB
 
 
 
Multi-IO:
 
*2 x 60 Pin 2.0mm space DIP connector
 
* 1 x 30 Pin 2.0mm space DIP connector
 
* 1 x 51 Pin 1.0mm space SMD connector
 
 
 
on Board:
 
HDMI interface
 
4 x User Leds(Green)
 
1 x Power Led(Red)
 
 
 
Supply Voltage from 2V to 6V
 
Mechanical: Dimension: 64x 50x 11mm
 
Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
 
 
 
 
 
== Tiny210Mother board ==
 
 
 
# Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
 
# AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
 
# RS485: 1 RS485 interface
 
# Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
 
# keys: 8 key
 
# RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
 
# Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
 
# USB Slave: 1 Road, the USB 2.0 specification
 
# Infrared receiver: 1
 
# ADC input: 6 ADC input
 
# Buzzer: 1, control by the PWM0
 
# EEPROM:AT24C08 (256 Byte) for I2C test
 
# LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD
 
# SDIO interface: used to connect the SDWiFi module and other
 
# CMOS Camera interface: used to connect CMOS camera
 
# RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
 
# PCB layer: 2
 
# PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
 
# Power supply: DC-5V
 
 
 
 
 
== Software ==
 
'''Linux&Android 2.3'''
 
*Boot loader
 
verison: Superboot-210<br>
 
Function: support boot and update system by TF-card(superboot)
 
*Linux kernel
 
verison: Linux-2.6.35<br>
 
Compile: arm-linux-gcc-4.5.1-v6-vfp
 
*Device Driver
 
TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard<br>
 
WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver
 
*File Systemsupport
 
Ubi filesystem, yaffs, ext2/3,
 
*Function use example
 
Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support<br>
 
OMS Camera support, 3G support(WCDMA, CDMA2000)<br>
 
USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen<br>
 
Dynamic Wallpapers
 
 
 
 
 
 
 
'''Linux'''
 
*Boot loader
 
verison: Superboot-210<br>
 
Function: support boot and update system by TF-card(superboot)
 
*Linux kernel
 
verison: Linux-2.6.35<br>
 
Compile: arm-linux-gcc-4.5.1-v6-vfp
 
*Device Driver
 
TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard<br>
 
WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver<br>
 
*File Systemsupport
 
Ubi filesystem, yaffs, ext2/3
 
*Graphics system
 
Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
 

Latest revision as of 06:31, 7 July 2012