Difference between revisions of "Mini USB/Serial Adapter"

From Geeetech Wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[Image:Mini_usb.jpg]]
 
[[Image:Mini_usb.jpg]]
  
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).
+
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI ([http://www.ftdichip.com/Drivers/VCP.htm drivers] are included with the Arduino software).
  
 
[[Image:Mini_usb_pinout.png]]
 
[[Image:Mini_usb_pinout.png]]
Line 16: Line 16:
  
 
See the g[http://arduino.cc/en/Guide/ArduinoMini uide to the Arduino Mini] for information on connecting the adapter to the Mini.
 
See the g[http://arduino.cc/en/Guide/ArduinoMini uide to the Arduino Mini] for information on connecting the adapter to the Mini.
 +
 +
How to buy
 +
 +
Click here:

Latest revision as of 07:05, 4 January 2012

Mini usb.jpg

This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).

Mini usb pinout.png

Pinout of the original Mini USB Adapter

Mini usb pinout new.png

Pinout of the revised Mini USB Adapter

Attach:mini_usb_schematic.pdf

Connecting to the Arduino Mini

See the guide to the Arduino Mini for information on connecting the adapter to the Mini.

How to buy

Click here: