Difference between revisions of "IR Transmitter and Receiver Kit"

From Geeetech Wiki
Jump to: navigation, search
m (Usage)
(How to buy)
 
(3 intermediate revisions by the same user not shown)
Line 27: Line 27:
 
[[File:IR 3.jpg|700px]]
 
[[File:IR 3.jpg|700px]]
  
The IR LED on the transmitter module keep on sending hexadecimal code A90 as the modulated IR signal at 38KHz. (More information about how IR LED and detector works ,please vsit Ladyada.com) The IR detector on the breakout detect the IR signal at 38KHz and demodulate it. You can read what the transmitter send on the serial monitor.  
+
The IR LED on the transmitter module keep on sending hexadecimal code A90 as the modulated IR signal at 38KHz. (More information about how IR LED and detector works ,please vsit [http://www.ladyada.net/learn/sensors/ir.html Ladyada.com]) The IR detector on the breakout detect the IR signal at 38KHz and demodulate it. You can read what the transmitter send on the serial monitor.  
  
;Note:Infrared Led on the IR transmitter module should be directed at IR detector on the receiving board for signal reception.
+
; Note:Infrared Led on the IR transmitter module should be directed at IR detector on the receiving board for signal reception.
  
 
[[File:IR COM1.jpg]]
 
[[File:IR COM1.jpg]]
Line 70: Line 70:
  
 
==How to buy==
 
==How to buy==
Click here to buy [http://www.geeetech.com/ir-transmitter-module-p-339.html IR Transmitter Module] and [http://www.geeetech.us/arduino-ir-remote-control-0038b-module-diy-kit-p-252.html IR Receiving Module]
+
Click here to buy [http://www.geeetech.com/ir-transmitter-module-p-339.html IR Transmitter Module] and [http://www.geeetech.com/ir-receiver-module-p-918.html IR Receiving Module]

Latest revision as of 03:02, 17 February 2015

Introduction

IR Transmitter

IR 1.jpg

IR Transmitter is a Arduino breakout for a simple and clear infrared LED on it. These Infrared lED operates around 940nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers.

IR Receiver

IR 2.jpg

IR receiver is a breakout board with IR detector mounting on it.IR detector is little microchips with a photocell that are tuned to listen to infrared light at 38KHz. They are almost always used for remote control detection - every TV and DVD player has one of these in the front to listen for the IR signal from the clicker.

Specification

  • Power Supply:5V
  • Interface:Digital
  • Modulate Frequency:38Khz

Applications

  • Remote control
  • TV control
  • Air conditioning control

Document

IR Remote library

Usage

IR 3.jpg

The IR LED on the transmitter module keep on sending hexadecimal code A90 as the modulated IR signal at 38KHz. (More information about how IR LED and detector works ,please vsit Ladyada.com) The IR detector on the breakout detect the IR signal at 38KHz and demodulate it. You can read what the transmitter send on the serial monitor.

Note
Infrared Led on the IR transmitter module should be directed at IR detector on the receiving board for signal reception.

IR COM1.jpg

If the infrared LED is not directed well at the IR detector, the IR detector on the receiving board cann't detect the modulated IR signals well and it will cause the decoded signal incorrect.

IR COM2.jpg

Example code

Transmitter

#include <IRremote.h>
IRsend irsend;
void setup()
{
 Serial.begin(9600);
}
void loop() {
   for (int i = 0; i < 50; i++) {
     irsend.sendSony(0xa90, 12); // Sony TV power code
     delay(40);
   }
 }

Receiver

#include <IRremote.h>
int RECV_PIN = 11; //define input pin on Arduino
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup()
{
 Serial.begin(9600);
 irrecv.enableIRIn(); // Start the receiver
}
void loop() {
 if (irrecv.decode(&results)) {
   Serial.println(results.value, HEX);
   irrecv.resume(); // Receive the next value
 }
}

How to buy

Click here to buy IR Transmitter Module and IR Receiving Module