Difference between revisions of "Geeetech Mizar S 3D Printer"

From Geeetech Wiki
Jump to: navigation, search
(How to replace PSU)
(How to replace a hotbed)
Line 82: Line 82:
 
=== '''How to replace a hotbed'''===
 
=== '''How to replace a hotbed'''===
  
 +
 +
{| class="wikitable"
 +
|-
 +
! Tools necessary for this guide
 +
|-
 +
| Allen keys – 3 mm
 +
 +
Flat screwdriver tip width 2.5 mm
 +
 +
Diagonal pilers
 +
 +
Zip ties
 +
 +
|}
  
 
=== '''How to replace a screen'''===
 
=== '''How to replace a screen'''===

Revision as of 02:40, 4 January 2023

Introduction

Product details

Unpacking and proper handling

Slicing

Printer maintenance

How to replace a hotend

Tools necessary for this guide
Wrench size 10 mm

Allen keys – 1.5/2/2.5/3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pliers

Electrical tape

Zip ties

Craft knife or equivalent

How to clean the hotend and replace a nozzle

Tools necessary for this guide
Tweezers for nozzle

Wrench size 6/10/20 mm

Cleaner rod (1.5mm diameter, 100mm length)

Needle for nozzle

Allen key - 2 mm

How to replace a control board

Tools necessary for this guide
Allen keys – 2.5/3 mm

Flat screwdriver tip width 2.5 mm

How to replace PSU

Tools necessary for this guide
Allen keys - 2.5/3 mm

Philips screwdriver for PSU cables

How to replace a hotbed

Tools necessary for this guide
Allen keys – 3 mm

Flat screwdriver tip width 2.5 mm

Diagonal pilers

Zip ties

How to replace a screen