Difference between revisions of "GT2560"

From Geeetech Wiki
Jump to: navigation, search
(2.1 Interface Layout)
(1 Introduction)
Line 1: Line 1:
 
=1 Introduction=
 
=1 Introduction=
GT2560 is a compact board that is integrated with the mighty function of the Arduino Mega2560+Ultimaker. The GT2560 can not only  
+
GT2560 is a compact board that is integrated with the mighty function of the Arduino Mega2560+Ultimaker. The GT2560 can not only take full place the Arduino Mega2560+Ultimaker on respect of both software and hardware, but has more premium features: the streamlined interfaces effectively avoid the unnecessary troubles, well-regulated compaction of components highly integrated saves more space and easier to be mounted on most applications.5 stepper motors, swappable driving modules, mighty ATmega2560 processor with 256k memory, 16MHz operating frequency, high-performance USB serial converter FT232RQ, all these make the GT2560 an ideal option for a 3D printer control board. What’s more, GT2560 can run over 12V and output 90W to a MOSFET, which gives higher torque and higher rotation rate.
 
+
<br/>
take full place the Arduino Mega2560+Ultimaker on respect of both software and hardware, but has more premium features: the  
+
<br/>
 
 
streamlined interfaces effectively avoid the unnecessary troubles, well-regulated compaction of components highly integrated saves  
 
 
 
more space and easier to be mounted on most applications.
 
5 stepper motors, swappable driving modules, mighty ATmega2560 processor with 256k memory, 16MHz operating frequency, high-
 
 
 
performance USB serial converter FT232RQ, all these make the GT2560 an ideal option for a 3D printer control board. What’s more,  
 
 
 
GT2560 can run over 12V and output 90W to a MOSFET, which gives higher torque and higher rotation rate.
 
 
 
 
Features:
 
Features:
1.Integrated with the mighty function of the Arduino Mega2560+Ultimaker, The GT2560 can not only take full place the Arduino  
+
<br/>1.Integrated with the mighty function of the Arduino Mega2560+Ultimaker, The GT2560 can not only take full place the Arduino Mega2560+Ultimaker on respect of both software and hardware, but also features compact size, more convenient connection, and more stable.
 
+
<br/>2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ.   
Mega2560+Ultimaker on respect of both software and hardware, but also features compact size, more convenient connection, and more  
+
<br/>3. The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V
 
+
<br/>4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse.
stable.
+
<br/>5.3 12v fan output and one PWM output for LED or other lighting equipment.
2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ.   
+
<br/>6. 3 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.
3. The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The  
+
<br/>7. Support 5 A4988 stepper drivers (3 for X/Y/Z axis, and 2 for extruders); the subdivision of stepper motor can be setup by dial switch, eliminating jumper caps, easier to operate.
 
+
<br/>8. 3 temperature sensor input (100k thermistor is recommended)
current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V
+
<br/>9. Extended LCD and SD card interface support both LCD2004 and LCD 12864, with which you can print without your PC.
4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in  
+
<br/>10. The firmware is the prevalent Marlin, which is known for stability, usability, and high-performance.
 
 
addition, the 5V USB is USB port protected with 500mA Recoverable fuse.
 
5. 3 12v fan output and one PWM output for LED or other lighting equipment.
 
6. 3 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are  
 
 
 
equipped with heat sink to ensure sufficient heat dissipation and stable operation.
 
7. Support 5 A4988 stepper drivers (3 for X/Y/Z axis, and 2 for extruders); the subdivision of stepper motor can be setup by dial  
 
 
 
switch, eliminating jumper caps, easier to operate.
 
8. 3 temperature sensor input (100k thermistor is recommended)
 
9. Extended LCD and SD card interface support both LCD2004 and LCD 12864, with which you can print without your PC.
 
10. The firmware is the prevalent Marlin, which is known for stability, usability, and high-performance.
 
 
==1.1 Overview and Hardware Resources==
 
==1.1 Overview and Hardware Resources==
  
[[File:1-1.jpg]]    
+
[[File:1-1.jpg]][[File:1-1b.jpg]]     
1-1(front and back images)
+
(front and back images)
Hardware resources
 
  
 +
Hardware resources:
 
12V 12A and 12V 5A power supply
 
12V 12A and 12V 5A power supply
 
1 power port for heatbed and 2 for extruder
 
1 power port for heatbed and 2 for extruder

Revision as of 02:44, 9 February 2015

1 Introduction

GT2560 is a compact board that is integrated with the mighty function of the Arduino Mega2560+Ultimaker. The GT2560 can not only take full place the Arduino Mega2560+Ultimaker on respect of both software and hardware, but has more premium features: the streamlined interfaces effectively avoid the unnecessary troubles, well-regulated compaction of components highly integrated saves more space and easier to be mounted on most applications.5 stepper motors, swappable driving modules, mighty ATmega2560 processor with 256k memory, 16MHz operating frequency, high-performance USB serial converter FT232RQ, all these make the GT2560 an ideal option for a 3D printer control board. What’s more, GT2560 can run over 12V and output 90W to a MOSFET, which gives higher torque and higher rotation rate.

Features:
1.Integrated with the mighty function of the Arduino Mega2560+Ultimaker, The GT2560 can not only take full place the Arduino Mega2560+Ultimaker on respect of both software and hardware, but also features compact size, more convenient connection, and more stable.
2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ.
3. The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V
4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse.
5.3 12v fan output and one PWM output for LED or other lighting equipment.
6. 3 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.
7. Support 5 A4988 stepper drivers (3 for X/Y/Z axis, and 2 for extruders); the subdivision of stepper motor can be setup by dial switch, eliminating jumper caps, easier to operate.
8. 3 temperature sensor input (100k thermistor is recommended)
9. Extended LCD and SD card interface support both LCD2004 and LCD 12864, with which you can print without your PC.
10. The firmware is the prevalent Marlin, which is known for stability, usability, and high-performance.

1.1 Overview and Hardware Resources

1-1.jpg1-1b.jpg (front and back images)

Hardware resources: 12V 12A and 12V 5A power supply 1 power port for heatbed and 2 for extruder

5 stepper motor input, (3 for X/Y/Z axis, and 2 for extruders)

Extended LCD & SD card interface

6 endstop input(X-MIN ,Y-MIN ,Z-MIN 和X-MAX ,Y-MAX ,Z-MAX)

3 input for thermistor (TEMP1, TEMP2 and TEMP3)

3 input for12V cooling fan

1 PWM output

Dimension: 107.3mm*78.7mm*22mm

weight: 80 g

1.2 Software Resources

Compiling environment: Arduino IDE Firmware: Marlin Host software:printrun Repetier-Host

1.3 Source

Arduino ide:http://www.geeetech.com/wiki/index.php/Download
Marlin:http://www.geeetech.com/wiki/images/3/39/Marlin-Marlin_v1.zip
printrun: http://www.geeetech.com/wiki/images/e/e1/Printrun-Win-Slic3r-10Mar2014.zip
Repetier-Host: http://www.geeetech.com/wiki/images/3/36/SetupRepetierHost_1_00.zip

2 Interfaces

2.1 Interface Layout

2-1.jpg

2.2 Interface specifications

1.DC IN: 12V 12A and 12V 5A 2.HOT_BED:heat bed 3.HEATER1: power supply for extruder 1 4.HEATER2: power supply for extruder 2 5.LCD ENCODER: LCD panel 6.SD Card 7. X_MIN/X_MAX/Y_MIN /Y_MAX /Z_MIN /Z_MAX: 6 end stop input 8. TEMP1: temperature sensor for extruder 1 9. TEMP2: temperature sensor for extruder 2 10. TEMP3: temperature sensor for heatbed 11. X,Y,Z:Stepper motors for X, Y, Z axis 12. EXT1, EXT2(A):Stepper motors for extruder 1 and extruder 2 13. FAN1,FAN2,FAN3:3 12V cooling fans 14. PWM: PWM output for cooling fan

2.3 subdivision of stepper motor

The subdivision of stepper motor can be setup by dial switch, turn on all

the dial switch, as the arrow shows

2-2.jpg 2-2

1. Subdivision on the base of A4988 stepper driving module:

Turn ON/OFF            Subdivision
MS1    MS2    MS3
OFF    OFF    OFF     full step
ON     OFF    OFF    1/2 step
OFF    ON     OFF    1/4 step
ON     ON     OFF    1/ 8 step
ON     ON     ON     1/16 step

2. Subdivision on the base of Drv8825 stepper driving module:

Turn   ON/OFF         Subdivision
MS1    MS2    MS3
OFF    OFF    OFF     full step
ON     OFF    OFF    1/2 step
OFF    ON     OFF    1/4 step
ON     ON     OFF    1/ 8 step
OFF    OFF    ON     1/16 step
ON     OFF    ON     1/32 step
OFF    ON     ON     1/32 step
ON     ON     ON     1/32 step

3 Development Environment setting

3.1 Interface Connecting and Setting

3-1.jpg

Note: Pay attention to the Plus-n-Minus of the power connector, reverse connection can cause irrevocably damages.

A4988 should also be connected to the right port, mismatches and revered directions can cause damage to the main board. you can  

The correct connections are as follow:

3-2.jpg

If you are using DRV8825 instead of A4988, The correct connections are as follow:

3-3.jpg

3.You are suggested to connect all the Periphery modules before testing.

3.2 Software setting

FT232RQ Driving Installation: Windows will prompt that a new USB Serial Port is detected, now you can check the device manager, you will see a new port named“USB Serial Port”

3-4.jpg
Then, windows will open the dialog box “found new hardware wizard”, check “no, not this time”, then click “next” to continue. 3-5.jpg
Then, windows will open the dialog box “found new hardware wizard”, Check “install from a list or specific location (advanced)”, then click “next”. 3-6.jpg
Specify installation directory where FT232RQ is to install driver. Click “browse” to find the directory and click “next” to continue. 3-7.jpg
If everything goes well, windows will install the Serial Driver for GT2560.

3-8.jpg

The graph below shows installation completed.

Now, you can find the corresponding Serial port in device manager of windows.

3-9.jpg

3.3 File Burning Windows users need install driver before uploading. The board: Tools > Board > Arduino Mega 2560 or Mega ADK, as shown below.


3-10.jpg

Configuring serial interface: Tools > Serial Port > the corresponding COM Port of GT2560 usually the last one. As shown below

3-11.jpg

Load in the file you need to burn, Click the “check ( )” button to check if it is right and then click the “ ” button to upload

firmware, as shown below.

3-12.jpg

3-13.jpg

Upon uploading, the LED indicator corresponding to the TX, RX and L on the GT2560 will blink, if they stop blinking, it means the file has been uploaded successfully.

3-14.jpg

After uploading, you can go on to the next step. If you cannot upload, check the dialog box below to identify the problem and solve it. The common mistakes are the wrong select of type of board or serial port etc.

4 Get Started

GT2560 is the CPU of a 3D printer, manipulating the whole process of printing. GT2560 can’t be put in use directly without

uploading firmware. 1. Firmware uploading- marlin. 2. Setting parameters of the firmware The parameters that need setting are as below, for those not mentioned just leave them as default.

  1. define BAUDRATE 250000

This parameter is for the baud rate of serial port. Note: a successful communication can be realized only when the Baud rate of

upper computer is identical with that of Firmware. The Baud rate is not set in random. The common Baud rate are: 2400,9600,19200

,38400,57600,115200,250000. The last three are frequently used for 3D Printer.

  1. define MOTHERBOARD 7

This parameter is set for board type. 3D Printer has many types of main board, and the settings of IOs are different, therefore,

the parameter has to correspond to the type of your board, or it can’t operate normally. The parameter of GT2560 should be 7

(single- nozzle). For other board, you can refer to the annotation on the board.

  1. define TEMP_SENSOR_0 1
  2. define TEMP_SENSOR_BED 1

The two parameters are set for the type of temperature sensor respectively. They are the critical parameter to check if the sensor

read temperature correctly. The printer can’t operate normally, even has potential risk (damage the device and even worse). You

must modify depending on the temperature sensor you use.

  1. define EXTRUDE_MINTEMP 170

This parameter is set to avoid potential risks when the extruder operates before reaching the rated temperature. If you use other

3D Printer, such as printer to make Chocolates, 45℃ is appropriate, so that the parameter configured to a lower value(such as 40℃

).

const bool X_ENDSTOPS_INVERTING = true; const bool Y_ENDSTOPS_INVERTING = true; const bool Z_ENDSTOPS_INVERTING = true.

The three parameters are set for the end stops of three axes. If the configuration is true, the end stop outputs 1 in default

condition, and outputs 0 when triggered. That is to say, mechanical end stop should connect to the NO (normally open) contactor. If

it is connected to the NC (normally closed), true should be changed to false.

  1. define INVERT_X_DIR false
  2. define INVERT_Y_DIR true

Mistakes are often made in the above two parameters. The parameters are different for different machinery. In principle, the origin

should be at lower-left corner of the print platform (origin: [0, 0]), or at up-right corner (origin: [max, max]). Only in this way

will the printing be correct, otherwise, the printing is the mirror image of one axis which is not what expected.

  1. define X_HOME_DIR -1
  2. define Y_HOME_DIR -1
  3. define Z_HOME_DIR -1

If the position of the origin is the minimum, the parameter is -1; if it is the maximum, the parameter is 1.

  1. define X_MAX_POS 205
  2. define X_MIN_POS 0
  3. define Y_MAX_POS 205
  4. define Y_MIN_POS 0
  5. define Z_MAX_POS 200
  6. define Z_MIN_POS 0

These parameters are crucial to the printing size. Fill in parameters by reference to the coordinate graphs. It is important to

note that the origin is not the printing center and the real printing center usually lies at [(x.max - x.min)/2, (y.max -y.min/2)].

The coordinate of central will be used in the slice tool. The printing center’s coordinate must correspond to the parameter

configuration, or it will print to the outside of the platform.

  1. define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}

The parameter means the homing speeds (mm/min). This parameter can be set as default if you use the x-axis and y-axis adopt

synchronous belt drive and z-axis adopts screw drive.

  1. define DEFAULT_AXIS_STEPS_PER_UNIT {85.3333, 85.3333, 2560, 158.8308}

These parameters are crucial to the printing size. These parameters indicate the pulse the axis need when operating 1mm. they are

corresponding to x, y, z axis and extruder respectively. In most cases these figure should be calculated by yourself, you can refer

to: http://calculator.josefprusa.cz/#steppers.

   So far, the commonest parameters have been configured and the printer can work now. In addition, if the 2004 LCD needs 

verifying, you should delete the “//” from “//#define REPRAP_DISCOUNT_SMART_CONTROLLER” to ensure the normal working.

5 FAQ

1, How many extruders can GT2560 support? At most 2 extruders, GT2560 supports 5 A4988 stepper motor drivers, they are X/Y/Z axis and 3 extruders. 2. What is the Power Requirement of GT2560? It is 12V 12A for the heatbed and 12V 5A for the logical part.

6 How to get

Visit here now!