Difference between revisions of "Filament"

From Geeetech Wiki
Jump to: navigation, search
(Created page with "=== PLA === === PETG === === ABS === === TPU ===")
 
(PLA)
Line 1: Line 1:
 
=== PLA ===
 
=== PLA ===
 +
Polylactic acid, commonly referred to as PLA, is made from natural materials such as corn starch. It’s the most widely-used filament in the 3D printing industry. PLA isn’t a plastic known for its strength compared with PETG or ABS, and it’s brittle and stiff compared with TPU. But it’s easy to print, does not need an enclosure or a direct drive extruder. It’s cheap, widely accessible and it can be printed more quickly than most other filament.
  
 +
[[File:Pla1.png]]
 +
 +
As for Geeetech PLA, the perfect settings in Cura slicer is shown as below:
 +
Nozzle temperature: 180-220 °C
 +
Bed temperature: 60-70 °C
 +
Print speed: 60-100 mm/s
 +
Initial layer height: 0.3 mm
 +
Initial layer print speed: 20 mm/s
 +
Travel Speed: At least 120 mm/s
 +
Retraction distance: 6 mm for Bowden setups, 2-3 mm for direct drive setups
 +
Retraction speed: 45 mm/s
 +
Cooling fan speed:100%
 +
Initial layer cooling speed: 0%
 +
Build plate adhesion: Skirt or Brim
 +
 +
The [https://www.geeetech.com/download.html?download_id=57 PLA temperature tower] is available in our website.
 +
 +
[https://www.geeetech.com/filament-storage-vacuum-bag-1pcs-mini-vacuum-machine4pcs-vacuum-bags-p-1265.html Geeetech Filament Storage Vacuum Bag]
  
 
=== PETG ===
 
=== PETG ===

Revision as of 06:02, 6 May 2023

PLA

Polylactic acid, commonly referred to as PLA, is made from natural materials such as corn starch. It’s the most widely-used filament in the 3D printing industry. PLA isn’t a plastic known for its strength compared with PETG or ABS, and it’s brittle and stiff compared with TPU. But it’s easy to print, does not need an enclosure or a direct drive extruder. It’s cheap, widely accessible and it can be printed more quickly than most other filament.

Pla1.png

As for Geeetech PLA, the perfect settings in Cura slicer is shown as below: Nozzle temperature: 180-220 °C Bed temperature: 60-70 °C Print speed: 60-100 mm/s Initial layer height: 0.3 mm Initial layer print speed: 20 mm/s Travel Speed: At least 120 mm/s Retraction distance: 6 mm for Bowden setups, 2-3 mm for direct drive setups Retraction speed: 45 mm/s Cooling fan speed:100% Initial layer cooling speed: 0% Build plate adhesion: Skirt or Brim

The PLA temperature tower is available in our website.

Geeetech Filament Storage Vacuum Bag

PETG

ABS

TPU