X
.jpg)
This V4.0 bord can only be a replacement for V4.0 board . can not replace V4.1B , V3.0, V3.1 board .
pls check which board does your printer has before order . the board type will be written on the board itself .
need order a same board as your printer originally has. otherwise will not be compatible .
GT2560 V4.0 control board, developed by Geeetech, is currently used for A10, A10M, A20 and A20M 3D printers. Here are its main features:
1. Using ATMEGA2560 as its core chip, with its flash memory at 256KB and operating frequency at 16MHz.
2. Compatible with 12V/24V input voltage. Featuring dual power supply, one for powering up the heatbed (15A), the other for other electronic parts (10A).
3. The interface for the heatbed comes with a high-power MOS tube, which is of ultra-low conductive internal resistance. High performance and stable.
4. With 2 interfaces for normally open fans and 1 interface for LED light.
5. Driven by 5pcs A4988 stepper motors for dual extruders.
6. With extension interfaces for LCD display and SD card. Support 2004 or 12864 LCD display.
7. Support 3D touch auto-leveling function and filament detector.
8. Using Marlin firmware, stable and easy to operate.
9. Highly integrated and easy to assemble.
Specifications:
Net weight: 72g
Gross weight: 113g
TOP
Is it possible to upgrade the board of an A10 GT2560 V3.0 to A10M V4.1B or A10M V4.0?
Dear customer , The corresponding motherboards and models of different machines are also different,The corresponding motherboard and model of different machines are also different, if you need to replace the motherboard, you can buy the corresponding motherboard on our official website
Where can I find a diagram with dimensions and pinouts for the GT2560 V4.0?
Dear customer , thanks for your consult , if you have any problems you can contact my mailbox : myorder@geeetech.com , hope you have a good day .
I need a replacement for GT2560 v3.0 board._br_Can you send me a link?
Dear customer, I will send this board link to your mailbox , thanks for your support .
Hello._br_I have an A10M. I would like to know if this board (GT2560 V4.0) arrives with firmware installed and ready to install and use._br_Thank you.
Hello, The motherboard firmware has been installed and can be used normally. I wish you a happy life.
Which control board does the Mizar DIY 3D printer use?_br_
Hello, pls place the order on this link, and leave a comment on the order confrim page of "I need the Mizar motherboard and sku is 700-001-1391", our colleague will process the order for you.
Hi, it is possible to have pinout of this board?_br_Thanks
Hello, pls send an email to myorder@geeetech.com, our colleague will send it to you.
Bonjour,_br_Ce modèle de carte ne s'adapte pas sur une A10M V3.0:_br_Parce qu'elle n'a pas la même architecture et ne s'adapte pas dans le châssis de l'imprimante? _br_Si non, est-elle compatible électriquement ?_br_Merci
hello, sorry , we do not have stock for V3.0 and V3.1 control board anymore . if your printer original board is V3 board , then V4.0 board is not compatible , because the screen connector , and all the cables connector on control board are different . if change into V4.0 board , may also need change a new screen , lcd cable, extension board , and all the cables on control board into V4.0 version . not sure if need change heatbed also. even change above items , still can not confirm to you , they will be compatible to make the printer work. Because we do not try this before.
Hello, i need a v3.1 board for an A10M, how can I buy it?
sorry , we do not have stock for V3.1 board anymore . other boards can not replace it .
hello, yes, it is pre installed with A10M firmware . this board is for A10M printer that originally has V4.0 board. so can order this same board as replacement
Does this board come preinstalled with A10M firmware?
I have an a10m with a board that is a v4.1b no one has a clue about it and it don't work so I need a replacement will this one work
hello, pls order this one , but leave a comment for your order , need A10M v4.1b board instead . i will change order for you when i process orders.