X
.jpg)
This item is a hotend spare part for the MK8 extruder, if your extruder suffers a clog or oozing that cannot be fixed, instead of replacing a new extruder, you can repair it with this kit.
Specifications:
Material: Aluminum & Stainless Steel & Brass
Connection method: external thread connection
Scope of application: 3D printer
Resistance value : R（25°C）=100K±1%
Operating temperature range: -40°C～+300°C
Cartridge Heater: 12V 40 W
Nozzle size: 0.3mm
Throat pipe length: 38mm with built-in Teflon
Wire length: 1M
Weight：47.8g
TOP
Will this work for the Mizar M Gradient color module?
Dear customer, To better solve your problem, you can contact me mailbox: myorder@geeetech.com .hope you have a good day .
I need a replacement for an original A30 (The 12v one) is this the right one?
Dear customer, It is suitable for A30 machine ,Thank you for your consultation.this is my mailbox myorder@geeetech.com ,if you have porblem please let me know .
The MK8 Extruder Hot End nozzles have a definite left/right aspect._br_The image above shows the right hand nozzle kit without any option for ordering the left hand nozzle kit._br_If physical terms, there is a definite difference. I need a left kit.
Dear customer, I will replenish to you left nozzle kit , if you have any problems you can contact me mailbox: myorder@geeetech.com .hope you have a good day .
Which size do I need for the i3ProB? 2-0.3mm?
hello, yes, 2-0.3mm for PRO B
will this work with the Geetech i3 pro w ?
yes, it can use on pro w printer
Is there a G2S Pro hot end replacement available?
yes, but it is not listed on the store, pls send email to sales@geeetech.com , will arrange offline for you
Hello, will this work to replace the hot end on the acrylic i3 pro c printer?
hello, this will not work with pro c printer, pls send email to us, will arrange for you, sales@geeetech.com
I have the Mecreator2 - will this kit with a 0,4mm nozzle fit for my printer? I've bought another kit wich runs with 12V and for the Mecreator I need 24V?
hello, this kit does not fit Mecreator 2. yes, you need 24 V for this printer, pls send email to sales@geeetech.com , we will arrange for you offline. the nozzle for mecreator 2 is 45-001-0114
Why is this item not listed in the Hot-End section ?? with the other MK8 replacement parts ??
thanks your kind remind, i will adjust it, thanks
is that comparable with the a30 are they all 12v
please send mails to victory.lei@geeetech.cn, thanks
Hello! What for a size do I need for the A30 Printer? Thanks!
please send mails to victory.lei@geeetech.cn, thanks
How do you change the nozzle?
use one wrench and one pliers： one to clamp hotend another to unscrew the nozzle
eee
is it ok for i3 Pro W? is possible also to but some other nozzles (only nozzles) ?
yes, u can use it. please search the key word"nozzle"then you will find it, thanks
I just bought an acrylic I3 Pro C, and need to replace both hotends/extruders. Do I need two of these kits with 0.4mm nozzles? I ask, because, like Michael Yuski, my current barrels don't have threads at the top.
Hi Brad,sorry for late reply.You can email me more details about your problem:jocelin.jia@geeetech.cn,I will help you.Thanks.
what hot end size i must use for mk8 extruder for prusa i3 pro b with arrulic frame?
Hi ,this one can and just the 0.3mm nozzle size one .
Hi, 1. is the MK8 Extruder Hot End appropriate for the Prusa 3i Pro X 2. Do you sell the teflon tube that goes with it. Cheers, John
Hi John,yes we can sell .
Hi Zena, I have a Geeetech Prusa I3 Pro C and my hot ends have the threads turned down to 5mm for the top 8mm. Your picture does not seem to show that. I know that the threads will not fit into the holder. Does this unit come as shown? Mike.
Hi Mike ,could you pls send this part to my emails?zina.luo@geeetech.cn i will help you to check .
Will this work on the Geeetech Aluminum Prusa I3 3D Printer
Will this fit the G2S Pro?
Hi Sean ,sorry that this one cannot fit.
muy buena impresora quede impresinado con la calidad de impresion
Hi Cristian ,glad to hear that.Which printer you are ?
ya tengo esta impresora y es excelente la mejor.
Hi, is this the correct part for a g2s pro?
sorry that cannot.
Hi, is it ok for a 1.75mm filament? (I have got your prusa I3 pro B MK8 extruder 1.75mm) Thanks. Mauro
Hi Mauro,yes .It's the 1.75mm one,can be used on the pro B .
Why can I not track my order??
hello michael,pls send me your order number and i will help you check the status.
I need 0.3mm nozzles for the 4 I just ordered
you can remark the size to the sale.Here he cannot note.
What size hole is on the M8 hot end?
Hi ,it's 0.4mm one ,which kind you would like i can ask our warehouse to arrange .