0

Your Shopping Cart is empty.

  • GT2560 3D printer control board package
    • i i
GT2560 3D printer control board package
INFO

SKU:800-001-0412

Shipping Weight:500g

Free Shipping!

$52.00
Qty:
VS
VOTES

Vote for specials.

3 votes

maker-moments

Please Choose:



Update log:

1. A 3-pin straight pin is added to connect with 3D touch auto leveling sensor.

2. The USB connector will not provide 5V for the board, if you need to refresh the firmware, please provide external power supply.

3. The power port has been changed from hollow to solid one to provide higher current-carrying capability.

4. The three heater connecter has been changed into blue ones: 2-pin RC301 5.0mm 15A

 

Package list

1 x Geeetech GT2560

5 x A4988 stepper driver

5 x Heatsink

3 x sticker

login or register to add your words.

  • Stefano Alderighi | 12/18/2017

    Hello. Can somone tell me why the GT2560 on the PWM_FAN keep on cooling when I set the speed to 0? Is it normal?

    • Zina Luo | 12/18/2017

      Hi Stefano ,which fan you used ? Is there 3 pins ? Which software you used ? controlled by repetier host?


  • Tony Mollica | 07/30/2017

    Can this board replace the GT2560revB board using the same Marlin firmware for the MeCreator2?

    • Zina Luo | 07/31/2017

      Hi Tony ,this is the GT256 revA ,when you place the order you can remark to the sales that the board need to be used on Me creator2 printer and she will arrange it ,any problem pls kindly let me know.


  • Danilo Tappia | 04/06/2017

    I have this board installed on my Prusa I3 ProB and I tried several fans with pwm capability but no way to reduce or control the fan spins. Everything else works just fine but I need absolutely the cooling fan software controlled. Please help. Regards Danilo

    • Zina Luo | 04/06/2017

      Hi Danilo,You can email your problem by details to our technican:technical@geeetech.com and ask him for help.


  • Ghislain Dimiglio | 03/29/2017

    Hi, I have the printer Geeetech Prusa I 3 aluminium. I buy this board with 3D Touch. What firmware i must load on this board ?

    • Zina Luo | 03/30/2017

      Hi Ghislain,you should use the same firmware on the printer .


  • Ron Swanson | 03/14/2017

    I have just purchased a ctc prusa i3 with the gt2560 Rev A. The problem is that it doesn't come with the ability to upgrade or change firmware without a lot of effort. Does this new board come with the ability to change the firmware simply by using the ardunio loader?

    • Zina Luo | 03/14/2017

      Hi Ron,the board uses the ardunio loader ,could you shoot what wrong for the board to our technican to check :technical@geeetech.com?

      • Ron Swanson | 03/17/2017

        Binary sketch size: 82,670 bytes (of a 258,048 byte maximum) avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_getsync(): timeout communicating with programmer This it the time out reading i get when I try updating firmware to my gt2560. Help? Ron

    • Zina Luo | 03/20/2017

      Hello Ron,pls email to our technican for help:technical@geeetech.com


  • Mike Hackenjos | 03/04/2017

    I have the Aluminum I3 and want to upgrade to GT2560. What do I need to complete this? LCD, cables, connectors??? I have emailed Sales twice with no response.

    • Zina Luo | 03/06/2017

      Hi Mike ,pls email to our technican for help:technical@geeetech.com


  • alan shore | 01/11/2017

    hi do you have this board 3d touch ready as have bad eyes and have problem see that small to solder

    • rita xiang | 01/16/2017

      Hello Alan, please do not worry, this new version has extra pins for the 3Dtouch, no soldering is needed any more.


  • ADNET DENIS | 11/20/2016

    Friends: Is there a 5 volt output on the gt 2560 map of the delta geeetech?

    • William Kwok | 11/21/2016

      Hi,there is a "5V" spot near the mainchip on the board.


  • Vasilis Finellis | 11/17/2016

    Hi! How can i connect external drivers to this card to drive bigger steppers such as NEMA 23 425 oz 3A? Needs something extra or so? Thank you!


  • Carl Lemieux | 10/22/2016

    Do you have updated firmware for the I3 Pro C Dual extruder for this board?

    • rita xiang | 10/23/2016

      for the latest firmware of pro C, please download here http://www.geeetech.com/forum/download/file.php?id=1555


  • Giovanni Luca Matera | 09/15/2016

    Hi,i have Prua i3 pro C Dual extruder and i want add Diamond Hotend. the controller board GT2560 permit to add anoter stepper motor

    • rita xiang | 09/16/2016

      sorry, this board can only support 2 extruders. You can use Rumba http://www.geeetech.com/geeetech-rumba-3d-printer-controller-board-p-848.html, which support 3 extruders


  • Errol Foster | 08/06/2016

    Can you adjust the voltage to the PWM for a cooling fan at the moment it's only 10.5 volts

    • Andrea Lambert | 08/07/2016

      You need to adjust the voltage of the power supply to adjust the voltage of the fan


  • Pablo Arturi | 07/22/2016

    I have a prusa i3 pro B (I think it was called Euro something), and I have a fuse (for the bed) not working. I replaced the fuse with other similar, but it looks tike the fuse holder is screwed. It works, but from time to time I have to push it. I want to replace the board, and if if there is a better board I would like to get it, as I don't want to deal with this things,


  • Gianarturo venturelli | 07/06/2016

    Traduttore ITALIANO INGLESE Good morning , I wanted to know if the 3D GT2560 card can be mounted on a Prusa i3 m201?

    • rita xiang | 07/06/2016

      yes, it can be used on M201, but there will be no Mixer feature for the printer.


  • Etienne Boucher | 04/30/2016

    What power supply I need for a makerbot type 3d printer with 24v dual extruder and 300 x 200 24v heat bed ? Do I need to purchase 2 power supplies or one ? I'm confuse and new in all this.

    • Quentin Qiu | 05/04/2016

      Hi you can contact this e-mail technical@geeetech.com for technical support. Thank you.

      • Etienne Boucher | 05/07/2016

        I also want to know what is the output voltage for the steeper motor if my power supply is 24v ? because 24v nema 17 look hard to find and are expensive compare to standard one.


  • Evan Albertyn | 04/21/2016

    hey there, i would like to connect a 24v heat bed to this board and use a 24v supply, also my 2 Z axis motors can run on 24v but the rest need 12v. do you have to declare this in the firmware or is it not possible to have 12v for some components and 24v for other components

    • Quentin Qiu | 04/22/2016

      Hello Evan, you can connect a 24V heat bed, but the motors must have the same voltage.


  • George Hawthorn | 10/31/2015

    Why 5 drivers? Only 3 slots visible.

    • Quentin Qiu | 11/03/2015

      Hello George, these 5 drivers are for A4988,and they respectively drive the X axis,Y axis and Z axis and two extruders.