Problems whit the Software

Post Reply
Levin
Posts: 1
Joined: Tue Aug 14, 2018 2:56 pm

Problems whit the Software

Post by Levin » Tue Aug 14, 2018 3:13 pm

I have got the Prusa I3 Pro W and the Objekts are not the best ones. I think the sofware is the Problem. I will upload a new Software whit Arduino IDE
but there is an eror massage:

Code: Select all

Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

In file included from sketch\Marlin.h:23:0,
                 from sketch\thermistortables.h:4,
                 from sketch\Configuration.h:792,
                 from C:\Users\levin\Downloads\Marlin\Marlin.ino:33:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1
 ^
sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24
 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1
 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28
 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1
 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32
 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\Marlin_main.cpp:30:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1
 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24
 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1
 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28
 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1
 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32
 ^

sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]

         LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
                                    ^

In file included from sketch\SdFile.h:27:0,

                 from sketch\cardreader.h:8,
                 from sketch\Marlin_main.cpp:44:

SdBaseFile.h:38: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {
        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\Marlin_main.cpp:30:

c:\program files (x86)\arduino\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;
                                 ^

exit status 1
using typedef-name 'fpos_t' after 'struct'
I hobe you can understand me.I m from Germany.

here are a failed Objekt

https://drive.google.com/open?id=1dvZvQ ... OnK8MVCu5S

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Problems whit the Software

Post by Gingko » Wed Aug 15, 2018 6:16 pm

This compile error it's because the firmware in the forum is an old version, if you use Arduino 1.0.1, you can compile successfully.

As for the printing quality, please first confirm that if the heatbed is properly leveled.
How much is the Z step/mm?

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Problems whit the Software

Post by BR365 » Thu May 09, 2019 4:56 pm

I don't think that it is a firmware problem. The board and firmware is the same as it is for the i3 Pro B and I use the GT2650 board with i3 Pro W firmware with my i3 Aluminium:

Image

The idler replacement part was printed with the i3 Aluminium with 1i Pro B/W board and firmware.

User avatar
vert
Site Admin
Posts: 736
Joined: Wed Nov 21, 2018 3:50 pm
Location: INDOORS

Re: Problems whit the Software

Post by vert » Thu May 09, 2019 4:59 pm

Would still suggest thinking about upgrading to Marlin 2.
Get The Current Marlin 2.0 Build For Almost All Geeetech 3D Printers Here
A10 M D T/A20 M T/I3PRO A B C W X/E180/A30/Mecreator2/M201/D200

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Problems whit the Software

Post by BR365 » Thu May 09, 2019 5:03 pm

vert wrote:
Thu May 09, 2019 4:59 pm
Would still suggest thinking about upgrading to Marlin 2.
Is there a Marlin 2 based official firmware available for i3 Pro B / C / W and A10 / A20 family printer?

User avatar
vert
Site Admin
Posts: 736
Joined: Wed Nov 21, 2018 3:50 pm
Location: INDOORS

Re: Problems whit the Software

Post by vert » Thu May 09, 2019 5:13 pm

BR365 wrote:
Thu May 09, 2019 5:03 pm
vert wrote:
Thu May 09, 2019 4:59 pm
Would still suggest thinking about upgrading to Marlin 2.
Is there a Marlin 2 based official firmware available for i3 Pro B / C / W and A10 / A20 family printer?
depends if you consider me official enough.
if you do then my builds are on my discord.
your welcome to check out my youtube and discord for details.
if i have testers i can port over other variants as well.
Get The Current Marlin 2.0 Build For Almost All Geeetech 3D Printers Here
A10 M D T/A20 M T/I3PRO A B C W X/E180/A30/Mecreator2/M201/D200

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests