Geeetech A10 firmware Marlin 1.1.9

Moderator: vert

Gandalf
Posts: 6
Joined: Sun Feb 03, 2019 7:23 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by Gandalf » Mon Feb 11, 2019 5:06 am

I've flashed this firmware but now hotend max temp is 235° while it should be 250° and heatbed is locked at 100° while it should be 110°, based on official user guide.

How can I fix this ?

Aeisens
Posts: 8
Joined: Tue Feb 12, 2019 4:33 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by Aeisens » Tue Feb 12, 2019 7:17 pm

Search the .ino file in the zip folder and open IT in the Arduino IDE. Open the configurarion.h tab and change the HEATER_0_MAXTEMP and the Bed Maxtemp. Then compile and upload IT via Arduino IDE

If you want a maximum of 250 you habe to Set the temperature to 265 and for the Bed also +15 to your desired value

CuRock
Posts: 1
Joined: Thu Feb 14, 2019 7:28 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by CuRock » Thu Feb 14, 2019 7:33 pm

Hello there,

I've updated my A10 just bought, but now in the "board info" , the board appears as Ultimaker, when previously was GT2560 (the real board), Is it a problem??. As a noob in 3d printing, now I dont know how to reset the firmware to the beginning state. Any advice?

Thanks in advance

User avatar
William
Site Admin
Posts: 6192
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Mon Feb 18, 2019 9:28 am

CuRock wrote:
Thu Feb 14, 2019 7:33 pm
Hello there,

I've updated my A10 just bought, but now in the "board info" , the board appears as Ultimaker, when previously was GT2560 (the real board), Is it a problem??. As a noob in 3d printing, now I dont know how to reset the firmware to the beginning state. Any advice?

Thanks in advance
I think if the pins.h file is correct.
Then it won't be a problem.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
William
Site Admin
Posts: 6192
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Tue Feb 19, 2019 9:15 am

vert wrote:
Mon Feb 18, 2019 10:19 pm
In older versions of Marlin the 2 pins files are nearly identical the gt2560 is an ultimaker clone.
You are correct ;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

entretoize
Posts: 9
Joined: Wed Feb 06, 2019 9:18 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by entretoize » Tue Feb 19, 2019 11:11 pm

There's a 1.1.9 version on marlin's github, is it the one you modified to work on A10 ?

User avatar
William
Site Admin
Posts: 6192
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Wed Feb 20, 2019 9:33 am

entretoize wrote:
Tue Feb 19, 2019 11:11 pm
There's a 1.1.9 version on marlin's github, is it the one you modified to work on A10 ?
I think you can download the Marlin2.x for A10.
Try to find vert's post then you can download it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

entretoize
Posts: 9
Joined: Wed Feb 06, 2019 9:18 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by entretoize » Wed Feb 20, 2019 5:21 pm

William wrote:
Wed Feb 20, 2019 9:33 am
I think you can download the Marlin2.x for A10.
Try to find vert's post then you can download it.
OK, but this is again some sources from someone, and we don't know what it is based on exactly. How to start from the marlin offical code and make it work for A10 ? Is it explained somewhere ?

User avatar
William
Site Admin
Posts: 6192
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Thu Feb 21, 2019 1:11 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests