Geeetech A10 firmware Marlin 1.1.9

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Geeetech A10 firmware Marlin 1.1.9

Post by _kaktus_ » Sun Nov 18, 2018 9:49 pm

:mrgreen:

Wooow :!:

Another novelty, new versions of controllers grow like mushrooms after the rain. :D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Lakiluke
Posts: 2
Joined: Sun Nov 25, 2018 7:10 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by Lakiluke » Sun Nov 25, 2018 7:18 pm

Hello everyone,
I have the software installed on my a10. Why does he start at bed levels in the middle of the heating bed and leaves out the left half of the heating bed? what are those settings for Fade Height and Bed Z? What is the setting set home offset? :?

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by ebam2014 » Wed Nov 28, 2018 1:35 am

So can I get an actual helpful answer


can I flash this firmware on my A10 with the gt2560 rev 6??????

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Wed Nov 28, 2018 9:48 am

1.Marlin 1.1.8 for A10 exist some problem,need to fix it at first.
2.We have got the feedback of these. When we finished it,we will release it.
We won't release it if we didn't test finished it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Rogeralcon
Posts: 5
Joined: Sun Dec 02, 2018 10:00 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by Rogeralcon » Sun Dec 09, 2018 4:02 am

Does this firmware work with the BLTOUCH?

Rogeralcon
Posts: 5
Joined: Sun Dec 02, 2018 10:00 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by Rogeralcon » Sun Dec 09, 2018 1:20 pm

:)
vert wrote:
Sun Dec 09, 2018 6:17 am
mine does.
http://www.geeetech.com/forum/viewtopic ... 98&t=61991

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by ebam2014 » Sun Dec 09, 2018 5:53 pm

William wrote:
Wed Nov 28, 2018 9:48 am
1.Marlin 1.1.8 for A10 exist some problem,need to fix it at first.
2.We have got the feedback of these. When we finished it,we will release it.
We won't release it if we didn't test finished it.
any news on this????

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Mon Dec 10, 2018 12:00 am

ebam2014 wrote:
Sun Dec 09, 2018 5:53 pm
William wrote:
Wed Nov 28, 2018 9:48 am
1.Marlin 1.1.8 for A10 exist some problem,need to fix it at first.
2.We have got the feedback of these. When we finished it,we will release it.
We won't release it if we didn't test finished it.
any news on this????
I think Geeetech will release the Marlin 2.x instead of Marlin 1.1.9
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Mon Dec 17, 2018 11:10 am

vert wrote:
Mon Dec 10, 2018 1:51 am
William wrote:
Mon Dec 10, 2018 12:00 am
ebam2014 wrote:
Sun Dec 09, 2018 5:53 pm


any news on this????
I think Geeetech will release the Marlin 2.x instead of Marlin 1.1.9
i posted a copy of 2.0 semi setup for the a10 it has issues with the screen and reading e temp but it did home xyz just fine.
Good job!
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Gandalf
Posts: 6
Joined: Sun Feb 03, 2019 7:23 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by Gandalf » Mon Feb 11, 2019 1:42 am

Which firmware should i use for a geeetech A10 latest version? (I think it's the latest, i've bought It 1 week ago)

Next week i'll get a bltouch, should i change the firmware or just plug the bltouch?

Post Reply