Geeetech A10 firmware Marlin 1.1.9

Moderator: vert

Post Reply
User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Geeetech A10 firmware Marlin 1.1.9

Post by MichaelK » Fri Aug 24, 2018 12:04 am

Now, i present my new firmware for the Geeetech A10 with Marlin 1.1.9 now. 8-)
Functions:
- Language english
- manual Bed Leveling over 9 Points activated
- automatic Z adjustment at printing

A10 Firmware on Thingiverse

Using without any warranty an on your own risk!
Last edited by MichaelK on Fri Aug 24, 2018 12:25 am, edited 1 time in total.

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Geeetech A10 firmware Marlin 1.1.9

Post by _kaktus_ » Fri Aug 24, 2018 12:06 am

:mrgreen:
Extra :!:
:lol:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

bernte_one
Posts: 25
Joined: Fri Aug 24, 2018 4:39 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by bernte_one » Fri Aug 24, 2018 4:45 pm

Hi Michael,

i bought the A10 in result of reading your blog. :D

would you pls be so Kind to write a short guide how to flash the Firmware (maybe in german on your blog) or here in Forum
My Printer will arrive next week from Czech, so the guide has not the highest prority for me, but i hope to see it on monday
:lol: no, was a joke

best regards Bernd

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Geeetech A10 firmware Marlin 1.1.9

Post by MichaelK » Fri Aug 24, 2018 5:40 pm

Of course! Many people ask me about how to install the firmware. :)
There a many possibilities and one of them is the easiest way to do it!

One of my remaining points is to write a tutorial to install a new firmware. :D
:arrow: Please have some patience. :!:

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Geeetech A10 firmware Marlin 1.1.9

Post by MichaelK » Fri Aug 24, 2018 10:46 pm

bernte_one:
so the guide has not the highest prority for me, but i hope to see it on monday
:lol: no, was a joke


I'am faster :lol:
Into my blog you found a description easy to update the firmware. 8-)

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Geeetech A10 firmware Marlin 1.1.9

Post by MichaelK » Mon Aug 27, 2018 11:21 pm

Update: New version on thingiverse.

I found a small bug into the firmware with the cooling fan to cooling up the printing object.
Bug fixed now. :mrgreen:

zonalimitatore
Posts: 72
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: Geeetech A10 firmware Marlin 1.1.9

Post by zonalimitatore » Tue Aug 28, 2018 7:16 am

Hello everyone...
This firm it's ready for install o i need edit config in arduino ide?

Or simply click on marlin.ino and upload on board?

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Geeetech A10 firmware Marlin 1.1.9

Post by MichaelK » Tue Aug 28, 2018 12:19 pm

zonalimitatore wrote:
Tue Aug 28, 2018 7:16 am
Hello everyone...
This firm it's ready for install o i need edit config in arduino ide?

Or simply click on marlin.ino and upload on board?
If you need to change any functions into Marlin you need to use the arduino ide to do it.
You can use many ways to install the firmware.

two possebilities:
1: Arduino IDE, conect the printer with Pc, start arduino with the marlin.ino and save them onto the printer directly.
2: use xloader http://russemotto.com/xloader/ to install the .hex File onto the printer.

I think, the second way is easier....

zonalimitatore
Posts: 72
Joined: Tue Aug 28, 2018 7:12 am
Location: Italy

Re: Geeetech A10 firmware Marlin 1.1.9

Post by zonalimitatore » Tue Aug 28, 2018 6:29 pm

MichaelK wrote:
Tue Aug 28, 2018 12:19 pm
zonalimitatore wrote:
Tue Aug 28, 2018 7:16 am
Hello everyone...
This firm it's ready for install o i need edit config in arduino ide?

Or simply click on marlin.ino and upload on board?
If you need to change any functions into Marlin you need to use the arduino ide to do it.
You can use many ways to install the firmware.

two possebilities:
1: Arduino IDE, conect the printer with Pc, start arduino with the marlin.ino and save them onto the printer directly.
2: use xloader http://russemotto.com/xloader/ to install the .hex File onto the printer.

I think, the second way is easier....
Danke.
So i just upload it without config.All config for A10 it's already set?

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Geeetech A10 firmware Marlin 1.1.9

Post by MichaelK » Tue Aug 28, 2018 7:02 pm

Yes, the configuration is set.

Now you need to leveling your heatbed very precision! After leveling you could print.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests