Slic3r Settings for Prusa i3 Pro W

Post Reply
User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

Slic3r Settings for Prusa i3 Pro W

Post by JustinSB » Tue Dec 19, 2017 5:36 am

Which ini file should I use for the Slic3r Settings for my Prusa i3 Pro W please?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Slic3r Settings for Prusa i3 Pro W

Post by William » Thu Dec 21, 2017 5:46 pm

Maybe you can refer to it
ProWconfig.zip
(1.34 KiB) Downloaded 2043 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

Re: Slic3r Settings for Prusa i3 Pro W

Post by JustinSB » Thu Dec 21, 2017 7:14 pm

Thanks William, I'm trying it right now...

User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

Re: Slic3r Settings for Prusa i3 Pro W

Post by JustinSB » Thu Dec 21, 2017 11:55 pm

William, this has the Nozzle Diameter set to 0.4mm, but I'm now pretty sure that the current batch of Pro W printers are shipped with a 0.3mm Nozzle?

richardradford
Posts: 0
Joined: Mon Mar 26, 2018 3:30 am

Re: Slic3r Settings for Prusa i3 Pro W

Post by richardradford » Wed May 09, 2018 7:27 pm

Hi Justin - Did you use these settings "as is" or did you end up modifying them?

Thanks

User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

Re: Slic3r Settings for Prusa i3 Pro W

Post by JustinSB » Thu May 17, 2018 4:55 am

After I fixed the nozzle size so that it actually matched what was on the Pro W that I had, I think that they were pretty much "as is".

mitch76
Posts: 1
Joined: Tue Aug 14, 2018 12:35 am

Re: Slic3r Settings for Prusa i3 Pro W

Post by mitch76 » Tue Aug 14, 2018 12:37 am

hi, i try this config with horrible result... anything new?

Post Reply