Hey guys, does anybody have an idea?
My Z-Axis-Motors are moving upwards without problems, but when turning downwards, they make a horrible sound and won't turn. I removed all of the rods, so it's just the motors left. Also, I tried plugging the motors as Y-Axis, there they work without a problem. Is my board broken or is there a way to fix this on my own?
Thanks in advance!!
Z-Axis won't move downwards
Re: Z-Axis won't move downwards
I sugest to check the order of the wires in the plug.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Z-Axis won't move downwards
Hi,ChaboCC wrote: ↑Mon Jun 11, 2018 2:18 amHey guys, does anybody have an idea?
My Z-Axis-Motors are moving upwards without problems, but when turning downwards, they make a horrible sound and won't turn. I removed all of the rods, so it's just the motors left. Also, I tried plugging the motors as Y-Axis, there they work without a problem. Is my board broken or is there a way to fix this on my own?
Thanks in advance!!
Have you done the A4988 test?
Switch A4988 of Z-axis with X-axis.