GT2560 rev B Spare controller card

Post Reply
Mikael_Moran
Posts: 0
Joined: Sun Dec 17, 2017 7:17 pm

GT2560 rev B Spare controller card

Post by Mikael_Moran » Sun Dec 17, 2017 7:28 pm

Hi!

Where can i buy an extra controller card, GT2560 Rev B ? Mine has burned suddenly ? Or can i use the GT2560 Rev A card ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 rev B Spare controller card

Post by William » Mon Dec 18, 2017 3:51 pm

Normal,the mainboard works well, the motherboard does not appear burned, you should first check your power supply and cable is normal.
If you need to replace the motherboard, you need to tell me your model at first.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mikael_Moran
Posts: 0
Joined: Sun Dec 17, 2017 7:17 pm

Re: GT2560 rev B Spare controller card

Post by Mikael_Moran » Mon Dec 18, 2017 4:17 pm

Hi.

Sorry i forgot to post the model of my printer, it is a Mecreator 2

The cables look fine, no short as i can messure, same as for the voltage from the power supply. I think all started with the y-driver board that get overheated, and burned, and then that short, burned the motherboard. I checked the stepper, and it works fine.

Attached a picture of the board.
[url=https://ibb.co/bCdTKm][img]https://thumb.ibb.co/bCdTKm/IMG_0874.jpg[/img][/url]

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 rev B Spare controller card

Post by William » Mon Dec 18, 2017 8:24 pm

The motherboard seems to be burned down because of a short circuit on driver board A4988
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mikael_Moran
Posts: 0
Joined: Sun Dec 17, 2017 7:17 pm

Re: GT2560 rev B Spare controller card

Post by Mikael_Moran » Tue Dec 19, 2017 3:03 am

I was on my way to try a new driver, but then i saw that the motherboard also was burned, so i newer did that. It happened under a print. I have newer encountered any problems before that.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 rev B Spare controller card

Post by William » Tue Dec 19, 2017 1:13 pm

OK.You should contact the related sales staff and let them send you a new board.
By the way,you should also ensure the driver board A4988 works well before printing.(Test the voltage of A4988 before you start printing,normal is 0.8-1.2V)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mikael_Moran
Posts: 0
Joined: Sun Dec 17, 2017 7:17 pm

Re: GT2560 rev B Spare controller card

Post by Mikael_Moran » Tue Dec 19, 2017 3:39 pm

Thanks for quick response, i will contact them.

Thanks again.

Cincerly
Mikael Moràn

Post Reply