GT2560 board Rev A4 / BL touch / Servo pins

Post Reply
Pepito06
Posts: 2
Joined: Tue Feb 14, 2017 7:42 pm

GT2560 board Rev A4 / BL touch / Servo pins

Post by Pepito06 » Tue Feb 14, 2017 11:30 pm

Hi all

I'm looking to add a brand new BL touch on my G2s. My GT2560 board have 3 pins on the left of the 3 thermistor plugs near the logo. Can I use them to plug it ? What is the wiring diagram ?
I know that I can solder the 3rd pin of the Zmin sensor but I don't want to...

Can you please give me a hint ?

Bye
Pepito

Veenoh
Posts: 54
Joined: Thu Dec 08, 2016 12:31 am

Re: GT2560 board Rev A4 / BL touch / Servo pins

Post by Veenoh » Wed Feb 15, 2017 12:21 am

Look for the 3D Touch manual on this site or on the product page. It has notes for using those extra 3 pins. I suspect it will work for the BL Touch as well.

Pepito06
Posts: 2
Joined: Tue Feb 14, 2017 7:42 pm

Re: GT2560 board Rev A4 / BL touch / Servo pins

Post by Pepito06 » Wed Feb 15, 2017 1:35 am

Thank you very much !!!

Post Reply