How to upload firmware for GTM32 Pro board?

ric chin
Posts: 71
Joined: Mon Jun 22, 2015 1:12 pm

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by ric chin » Sat Sep 17, 2016 3:59 am

Nope still does it...way less, but still retracts too much and you loose filament continuum.

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by Lami René » Tue Sep 27, 2016 6:10 am

Hello,

And for users on Linux Kubuntu 16.04 64-bit, how we should proceed and what software?
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by William » Tue Sep 27, 2016 6:11 pm

Lami René wrote:Hello,

And for users on Linux Kubuntu 16.04 64-bit, how we should proceed and what software?
Hi,
The engineer said you guys can find a similar terminal on Linux like the one on Windows,just need to make sure the baud rate and the protocol are the same as the pics show:
QQ截图20160927180502.jpg
QQ截图20160927180502.jpg (21.03 KiB) Viewed 19694 times
QQ截图20160927180516.jpg
QQ截图20160927180516.jpg (18.33 KiB) Viewed 19694 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by Lami René » Tue Sep 27, 2016 6:57 pm

Bonjour,

Merci pour ces informations !

Pourriez-vous nous préciser le nom des paquets Linux à installer et à utiliser ou les lignes de comment à copier/coller dans un terminal pour installer ces logiciels dans nos ordinateurs Linux ?
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by Toy » Wed Sep 28, 2016 11:50 am

Hi,
It's not easy to flash the firmware in linux, you'll need something linke J-link, minicom, and we haven't tried that yet.
You'd better use a windows system to do that.

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by Lami René » Wed Sep 28, 2016 4:41 pm

Bonjour,

Merci pour ces informations !

J'ai installé "minicom (2.7-1build1)" et "cutecom (0.22.0-2)" plus "lrzsz (0.12.21-8)", mais je n'ai jamais utilisé ce genre de logiciel. Alors il nous faudrait des copies d'écrans comme ce que vous avez fait pour les utilisateurs de MS-Windows.

S'il vous plaît, pourriez-vous procédé rapidement à vos essais pour être en mesure de nous transmettre la procédure exacte et détaillée à utiliser pour mettre à jour le firmeware !

Merci d'avance pour la promptitude avec laquelle vous produirez le guide de mise à jour du firmeware sous Linux Kubuntu.
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by Lami René » Mon Oct 03, 2016 2:06 pm

Toy wrote: ...
You'd better use a windows system to do that.
Je n'utilise ce type de système ou de logiciel de Microsoft, j'utilise uniquement Linux Kubuntu 16.04 64 bits !

Sur votre page Web de l'imprimante Geeetech Restock 301 :

http://www.geeetech.com/geeetech-rostoc ... -1008.html

vous écrivez :

« Operating system: Windows/Mac/Linux »

Alors, je m'attends a ce que vous respectiez votre parole, votre texte écrit sur le Web.

Cordialement,

L'ami René
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by William » Tue Oct 04, 2016 10:28 am

Lami René wrote:
Toy wrote: ...
You'd better use a windows system to do that.
Je n'utilise ce type de système ou de logiciel de Microsoft, j'utilise uniquement Linux Kubuntu 16.04 64 bits !

Sur votre page Web de l'imprimante Geeetech Restock 301 :

http://www.geeetech.com/geeetech-rostoc ... -1008.html

vous écrivez :

« Operating system: Windows/Mac/Linux »

Alors, je m'attends a ce que vous respectiez votre parole, votre texte écrit sur le Web.

Cordialement,

L'ami René
Hi,
I guess « Operating system: Windows/Mac/Linux »
means the software Repetier Host:
QQ截图20161004102140.jpg
QQ截图20161004102140.jpg (86.84 KiB) Viewed 19354 times
Actually,you don't need to flash the firmware for 301(it can't be modified because of the close source),and it is well flashed when it leaves the factory.
So i guess it doesn't matter.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by Lami René » Tue Oct 04, 2016 12:13 pm

Bonjour William Kwok,

Pas seulement, c'est pour tout ce qui touche les logiciels, le software ! Geeetech doit fournit pour les trois environnements (MS Windows, Mac et Linux) les logiciels ainsi que la documentation adéquate pour les trois.

Comme ici, la liste des paquets a installer et la procédure bien documentée pour le faire sous Linux pour la mise à jour du micrologiciel (firmware) de la carte contrôleur GTM32 Pro.

Cordialement,

L'ami René
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

raoulito9
Posts: 42
Joined: Mon Sep 05, 2016 3:24 am

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Post by raoulito9 » Sat Oct 15, 2016 1:56 am

Hi.
I'm trying to burn new firmware on my 301.
All is Ok with the first part, but the final doesnot work.
When i try to send the new firmware with hyperterminal, the process does not work, and i get a time out.
No problem to burn the bootloader, and the no problem to connect with hyperterminal.
I tried to run it under admin mode, Windows XP compatobility mode, the printer alims off, then on, on various usb 2 or 3 ports, and it just does not burn anything.
My PC is a recent W 10 64 bits machine.
Look at the 2 screenshots :
CaptureHT.PNG
CaptureHT.PNG (72.43 KiB) Viewed 19645 times
CaptureHT2.PNG
CaptureHT2.PNG (52.66 KiB) Viewed 19645 times

Post Reply