Extruder heating problems
-
- Posts: 3
- Joined: Tue Mar 01, 2016 8:53 pm
Extruder heating problems
I just finished assembling my prusa I3 X and as soon as the extruder got to 200 degrees something popped in the extruder heat block and now it wont read temp or heat up. What can I do to fix this issue?
Re: Extruder heating problems
you might need to check the heater resistance according to this link , see if it is shorted out. Or maybe the wirings are shorted out.
http://www.geeetech.com/forum/viewtopic ... 19&t=17039
http://www.geeetech.com/forum/viewtopic ... 19&t=17039