For people who wants STL files of parts

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

For people who wants STL files of parts

Post by zhangxueyou » Mon Mar 23, 2015 3:34 pm

Prusa I3A
Acrylic_I3_STL(A).rar
(956.23 KiB) Downloaded 1087 times
prusa I3B
I3B-STL.rar
(405.69 KiB) Downloaded 1134 times
Delta Rostock mini
RKM.zip
(1.71 MiB) Downloaded 684 times
Me Creator
ME CREATOR PLASTIC PARTS 1-STL.rar
(598.83 KiB) Downloaded 720 times
Dual extruder holder
dual extruder.zip
(128.37 KiB) Downloaded 822 times
LCD 2004 button knob
Knob-B01.zip
(1.14 MiB) Downloaded 578 times
Ramps1.4 fan mount (For better cooling the MOSFET on mainboard)
RAMPS_Fan_Mount.zip
(6.76 KiB) Downloaded 632 times

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: For people who wants STL files of parts

Post by zhangxueyou » Sat Jun 27, 2015 5:08 pm

Which one? Could you please take a picture? We will send the stl file to your emal as fast as possible.

aaronherrick
Posts: 12
Joined: Tue Jun 16, 2015 6:29 am

Re: For people who wants STL files of parts

Post by aaronherrick » Sun Jun 28, 2015 9:33 am

It is a 3 part hot end for the G2, using the heim joint rods. Thanks!
Attachments
hot end.jpg
hot end.jpg (229.88 KiB) Viewed 19076 times

aaronherrick
Posts: 12
Joined: Tue Jun 16, 2015 6:29 am

Re: For people who wants STL files of parts

Post by aaronherrick » Mon Jun 29, 2015 2:42 am

I am looking for the STL files for the Spider and the 2 part hot end holder that fits inside it. for the G2 mini Rostock.
Attachments
hot end.jpg
hot end.jpg (229.88 KiB) Viewed 19077 times

dantman16
Posts: 1
Joined: Sun Jul 05, 2015 6:50 am

Re: For people who wants STL files of parts

Post by dantman16 » Sun Jul 05, 2015 2:13 pm

I need to print spider and carriage for Delta Rostock mini G2 DIY kit with auto-leveling. Where can I get the STL files? Thx.

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: For people who wants STL files of parts

Post by Sherry » Mon Jul 06, 2015 5:02 pm

please find in the following link.
http://www.thingiverse.com/

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: For people who wants STL files of parts

Post by Sherry » Mon Jul 06, 2015 5:42 pm

dantman16 wrote:I need to print spider and carriage for Delta Rostock mini G2 DIY kit with auto-leveling. Where can I get the STL files? Thx.
Hi,i have sent the file s to your mailbox.

arachno7
Posts: 3
Joined: Tue Jul 07, 2015 4:11 am

Re: For people who wants STL files of parts

Post by arachno7 » Tue Jul 07, 2015 4:22 am

Hi,

I just purchased and received a Delta Rostock mini G2s kit. Is there somewhere where I can get all the printed parts STL files to print replacements? That's usually the first thing I print in case parts break.

Thanks

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: For people who wants STL files of parts

Post by Sherry » Tue Jul 07, 2015 9:32 am

hi,i have sent the stl file to you mailbox.

rottenwolf24
Posts: 4
Joined: Fri Jun 19, 2015 4:14 pm

Re: For people who wants STL files of parts

Post by rottenwolf24 » Tue Jul 07, 2015 9:41 pm

hello, I need the original stl files for delta rockstock g2s, the ones in the zip are different.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest