TPU not Working with A30M
TPU not Working with A30M
While the A30M doesn’t specifically say it works with flexible TPU, I found the extruder stops feeding it. I tried modifying the tension screw on the extruder which worked for a while, but only a few minutes before it stopped again. I’m looking to replace the extruder with a Bontech type extruder. Anyone have any ideas on a suitable extruder for flexible filiments using a bowden tube or what i can do to fix the ones fitted to the A30M?
Re: TPU not Working with A30M
Hi, Flexible Consumables for Printing on Proximal Extruder.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: TPU not Working with A30M
Hi, are you saying I need a Proximal extruder on my A30M to print with flexible filiments?
Re: TPU not Working with A30M
Hi, If using flexible supplies,
This is best done using a short-range extruder.
This is best done using a short-range extruder.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: TPU not Working with A30M
Oh ok. So as the A30M uses a Bowden tube and remote extruder from the hot end, it’s really not suitable for printing flexible filiments
That’s disappointing
That’s disappointing
Re: TPU not Working with A30M
Suitable, but with very low volumetric speed. And possible you need to lubricate filament (use drop of gun oil to filament filter).
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.