Blue screen after pressing reset

Post Reply
Krocosmos
Posts: 1
Joined: Sat Jan 18, 2020 2:16 am

Blue screen after pressing reset

Post by Krocosmos » Sun Jan 19, 2020 7:17 pm

Hi,

I wanted to upgrade Marlin with files given by geeetech. I installed CH340 driver, started Firware Tool from geeetech, drop .hex file, click on upload local while holding reset, Nothing happened but now I have a blue screen on my printer and impossible to print something... :x

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Blue screen after pressing reset

Post by William » Mon Jan 20, 2020 9:36 am

:D Hi, If your printer can upload firmware normally,
No need to press the reset button while uploading;
You can try the firmware again.
Then check if your wiring is loose and tighten the screen wiring.
Can your printer print via USB connection to a computer?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply