How to use the Firmware Toolkit to upgrade official website firmware

Locked
User avatar
William
Site Admin
Posts: 6196
Joined: Tue Jun 07, 2016 9:38 am

How to use the Firmware Toolkit to upgrade official website firmware

Post by William » Sat Dec 07, 2019 3:46 pm

:D Hi,Guys

something about how to upgrade the hex firmware on the official website

Official website firmware address: https://www.geeetech.com/
UXQ2UX${BGDI9YYT~~HX~MW.png
UXQ2UX${BGDI9YYT~~HX~MW.png (302.29 KiB) Viewed 9853 times
1. Install the USB driver
First, turn on the power and connect the printer to the computer with a USB cable. Under normal circumstances, the computer will automatically search for and install the driver.
The latest motherboard GT2560 V4.0 communication chip is CH340

2.If the driver cannot be automatically installed on the computer when first connected, you need to recheck whether the driver has been successfully installed.

Right-click on your computer and select "My Computer"-> "Properties"-> "Device Manager".
com.png
com.png (108.18 KiB) Viewed 9855 times
If an exclamation point appears, you need to manually install the printer driver on your computer

!.png
!.png (135.59 KiB) Viewed 9855 times
you can refer to this:https://www.geeetech.com/forum/viewtopi ... RlcFtWdCG4

3. Download the Firmware toolkit and burn the firmware

Open tool firmware toolkit
Firmware toolkit download address:https://www.geeetech.com/download.html?download_id=40
xfw ff.png
xfw ff.png (77.7 KiB) Viewed 9855 times

4.Click select again to open the firmware you want to upgrade

ps:you need choose the com match your printer.
xhex.png
xhex.png (121.37 KiB) Viewed 9855 times
5. Click Upgrade from local and wait for the upgrade to complete.
The upgrade is completed as shown in the figure

f.png
f.png (517.1 KiB) Viewed 9855 times
6.Restart your printer and re-calibration your printer then enjoy it!
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Locked

Who is online

Users browsing this forum: No registered users and 18 guests