Some of my prints on the Pro W

Post Reply
keyser187
Posts: 26
Joined: Mon Jan 22, 2018 9:28 am

Some of my prints on the Pro W

Post by keyser187 » Mon Oct 01, 2018 8:53 pm

just thought i would share some of my prints i have done on my Pro W and hopefully encourage peeps not to give up on it.
my printer is not perfectly calibrated or fine tuned, also not the best cooling fan but still pleased with the results.
Attachments
DPP_0011.JPG
DPP_0011.JPG (501.3 KiB) Viewed 1841 times
DPP_0010.JPG
DPP_0010.JPG (529.52 KiB) Viewed 1841 times
DPP_0009.JPG
DPP_0009.JPG (547.92 KiB) Viewed 1841 times
DPP_0008.JPG
DPP_0008.JPG (569.06 KiB) Viewed 1841 times
DPP_0007.JPG
DPP_0007.JPG (524.73 KiB) Viewed 1841 times
DPP_0006.JPG
DPP_0006.JPG (497.19 KiB) Viewed 1841 times
DPP_0005.JPG
DPP_0005.JPG (534.19 KiB) Viewed 1841 times
DPP_0003.JPG
DPP_0003.JPG (575.64 KiB) Viewed 1841 times
DPP_0002.JPG
DPP_0002.JPG (487.13 KiB) Viewed 1841 times
DPP_0001.JPG
DPP_0001.JPG (511.46 KiB) Viewed 1841 times

User avatar
_kaktus_
Site Admin
Posts: 1179
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Some of my prints on the Pro W

Post by _kaktus_ » Tue Oct 02, 2018 1:17 am

Hi
:mrgreen:

Super printouts. :D
Some of them are very difficult to make.

Congratulations. :lol:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

keyser187
Posts: 26
Joined: Mon Jan 22, 2018 9:28 am

Re: Some of my prints on the Pro W

Post by keyser187 » Tue Oct 02, 2018 2:47 am

thanks.
the t rex was my last print, had to be in transparent because thats all i got :( and that was done in two pieces with NO SUPPORTS!!!
i love models with no supports! :D

kokorski
Posts: 5
Joined: Thu Aug 09, 2018 5:17 am

Re: Some of my prints on the Pro W

Post by kokorski » Mon Feb 11, 2019 8:20 pm

Hi guys:

Very nice job. Can you tell me what software are you using....
Can you share your profile if its possible?
Thx in advance

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Some of my prints on the Pro W

Post by BR365 » Mon Feb 11, 2019 8:49 pm

The t rex looks incredible! Great print!

joe88
Posts: 4
Joined: Wed Feb 20, 2019 1:07 am

Re: Some of my prints on the Pro W

Post by joe88 » Wed Feb 20, 2019 1:11 am

Hi,

very nice prints!

I'm finished my assembly of the printer and i have now some issues with the extruder but I am not sure if this is on hardware side or just the settings.

Can you provide my youre settings please?

Regards

keyser187
Posts: 26
Joined: Mon Jan 22, 2018 9:28 am

Re: Some of my prints on the Pro W

Post by keyser187 » Wed Mar 27, 2019 11:03 pm

im using cura for slicing.
profiles and settings will change depending on the model and the material being used and also individual printers so copying settings and profiles dont really work.

manuolito
Posts: 2
Joined: Thu May 23, 2019 5:01 am

Re: Some of my prints on the Pro W

Post by manuolito » Thu May 23, 2019 5:47 am

Hi keyser187,

Those are a handful of great prints, congratulations. You seem to be experienced with 3D printer. Aside sharing the profiles which as you mentioned are too specific, do you have some tips? Specially for the support part? Indeed, did you managed to get the Mario without support?

Also, did you upgraded your printer? I can see a fan in a position which is not the initial one (at least in my i3 Pro W version from April 2019).

Thanks :D

bucito76
Posts: 3
Joined: Mon Jan 07, 2019 2:33 am

Re: Some of my prints on the Pro W

Post by bucito76 » Mon Aug 19, 2019 5:46 pm

Wowwwww , amazing impressions. A real show. I would like to know if the firmware you use is the original one, I can't find updates.

greetings and congratulations

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests