I3 pro whit EasyPrint3d ver 1.2.3

Post Reply
camivo
Posts: 4
Joined: Fri Jul 05, 2019 5:42 pm

I3 pro whit EasyPrint3d ver 1.2.3

Post by camivo » Fri Jul 05, 2019 6:03 pm

I can't get the printer to work with easyprint3d ver 1.2.3. The printer connects, but I can't do anything. If I ask for information from the assembled SW .. he replies UNKNOWN.
By LCD I can move the axes and warm up. I haven't tried with SD
I can't download the firmeware.
What can I do? Help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 pro whit EasyPrint3d ver 1.2.3

Post by William » Fri Jul 05, 2019 6:21 pm

Hi, You can try downloading Repetier Host and try it out.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

camivo
Posts: 4
Joined: Fri Jul 05, 2019 5:42 pm

Re: I3 pro whit EasyPrint3d ver 1.2.3

Post by camivo » Fri Jul 05, 2019 7:27 pm

Ciao .
Thanks for the reply.
What is it Repetier Host?

Thanks

camivo
Posts: 4
Joined: Fri Jul 05, 2019 5:42 pm

Re: I3 pro whit EasyPrint3d ver 1.2.3

Post by camivo » Fri Jul 05, 2019 8:01 pm

hi,
i can download the file "I3proW_V1.0.03.hex" directly with AVRDUDESS in Arduino mode?

Thanks.

Best reguards

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 pro whit EasyPrint3d ver 1.2.3

Post by William » Sat Jul 06, 2019 9:04 am

Hi, Repetier Host is a slicing software.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

camivo
Posts: 4
Joined: Fri Jul 05, 2019 5:42 pm

Re: I3 pro whit EasyPrint3d ver 1.2.3

Post by camivo » Sat Jul 06, 2019 1:43 pm

Thank you very much.
I tried Repetier Host and it works. I also downloaded EasyPrint3D version 1.2.6 and it works.
I regret having lost a lot of time trying the version given with the printer.

Best reguard.

Ciao

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 pro whit EasyPrint3d ver 1.2.3

Post by William » Sat Jul 06, 2019 2:53 pm

Thanks for your feedback. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply