Geeetech A10 glass bed

Post Reply
Limon1
Posts: 25
Joined: Sat Jan 30, 2021 7:33 am

Geeetech A10 glass bed

Post by Limon1 » Mon Mar 29, 2021 7:47 am

Hi guys I'm very new to 3d printing and I'm ready to pull my hair out!

I bought the superplate glass bed for my a10 which is obviously thicker than the plastic bed that came with the printer. I have the bed the lowest it can go but it's still not enough room for the hot end nozzle as it touches the base https://showbox.bio/ https://tutuapp.uno/ https://vidmate.cool/.

How do I manually set a new height for the z axis please? I've gone into the settings and adjusted the home height but it doesn't save the adjustment it goes back to default. Please help!

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Geeetech A10 glass bed

Post by Admin » Fri Apr 02, 2021 5:24 pm

Hello, you can check the zoffset of the printer. This is the setting that controls the height of the print head from the printing platform. Simply adjust it.

Post Reply