Hello everybody,
i still have some print quality problems. I've read and tried a lot, but it's still not satisfactory.
Maybe you can help me get the stringing away.
My structure:
- Geetech A10 -v3Board
- Marlin 2.0 (http://www.tobiasschuerg.de/3d%20printi ... in-v2.html)
- PrucaSlicer2.2.0
PS.: Since Marlin 2.0, the heated bed stays on after printing.Where can you change in the Marlin firmware?
Thanks.
A10 - PrucaSlicer - Stringing
A10 - PrucaSlicer - Stringing
- Attachments
-
- 20200522_120738.jpg (297.34 KiB) Viewed 2047 times
-
- 20200522_120727.jpg (304.67 KiB) Viewed 2047 times
-
- 20200522_120715.jpg (298.16 KiB) Viewed 2047 times
-
- 20200522_120704.jpg (262.65 KiB) Viewed 2047 times
-
- 3.png (10.86 KiB) Viewed 2047 times
-
- 2.png (27.66 KiB) Viewed 2047 times
-
- 1.PNG (26.31 KiB) Viewed 2047 times
Re: A10 - PrucaSlicer - Stringing
Hi,it is recommended to use Repetier_Host,
you can try retraction distance 5mm, retraction speed 30-40mm / s
you can try retraction distance 5mm, retraction speed 30-40mm / s
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!