Geeetech

Posted: **Fri Jan 31, 2020 8:07 pm**

Hi,

I have Geeetech A10T. I purchased a Superplate glass platform for it and installed it. Now, I can't find how to level the bed with it since it rises the surface in about 5mm.

Thanks

Posted: **Sat Feb 01, 2020 4:42 am**

use screw dials on hotbed. Or push Z switch slightly higher, but not reccomend 5mm but 3-4mm only, adjust via bed then.

Posted: **Sat Feb 01, 2020 10:24 pm**

Thanks. I tried the bed screws but it wasn't enough. Rising the Z sensor did the trick.

Geeetech

Leveling bed with glass platform

Leveling bed with glass platform

Re: Leveling bed with glass platform

Re: Leveling bed with glass platform