A10(M) Stringing Hell

[Fugly]

Hi Guys

Well I've got my printer for almost a year now and it was a journey to say the least. it taught me alot. i even downgraded to the A10 Hotend instead of the A10M Dual.
but there is 1 thing i can't get rid of and that's this stinging it does. no matter what i do.

IMG_20191018_004019.jpg (361.42 KiB) Viewed 6459 times

So what did i all do.

• Estep 100mm = 100mm

• Temperature. PLA tried 190 > 215 didn't have any effect

• Retraction from 1mm > 10mm + lowering or increasing retraction speeds 25 > 60

• Tried Cousting setting

• Other Slicers

• Other Extruder from Stock to all metal extruder

• Other Firmware Running 2.0 now

• Followed all recommended YT solutions i can find

My A10(M) is cursed
it also came with extreme warped bed.

if anyone has a idea plzz let me know.. I'm gonna kill this machine or myself soon!
Nha would never hurt the machine!

[Fugly]

Thanks.. definitely going to kill the machine now!!

[Fugly]

Oke i disassembled the peaces i just can't get those filters out. Tried all my star screw drivers.. and i suspect it has to be 15 put its not coming lose.
is it screwed in or pressed?

[Fugly]

Well got them out. at least i got them out of my old dual hotend. but im running the A10 hotend that i ordered later. and this one didn't have a filter.soooo back to square 1.

Going to kill my self!

[Jarda3d]

Did you try my slic3r profile? It is not only retract who made these artifacts.