Geeetech extruder Extension Board connector

Post Reply
jcook42387
Posts: 1
Joined: Sat Mar 09, 2019 6:25 pm

Geeetech extruder Extension Board connector

Post by jcook42387 » Sat Sep 07, 2019 7:11 pm

Attached is a photo of the "Geeetech extruder Extension Board" I'm trying to determine what size the jst connectors are on it. Specifically I am interested in the "Air Blower" jst size. It's obviously two pins, but what pitch?

Thank you!
Attachments
Geeetech_20181031065613_3.jpg
Geeetech extruder Extension Board
Geeetech_20181031065613_3.jpg (37.54 KiB) Viewed 4586 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech extruder Extension Board connector

Post by William » Mon Sep 09, 2019 9:48 am

Hi, it is refers to the fan of the hot end cover.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

HighDenzity
Posts: 1
Joined: Fri Apr 05, 2019 4:07 am

Re: Geeetech extruder Extension Board connector

Post by HighDenzity » Tue Oct 08, 2019 5:19 pm

The Connectors are JST-PH!

trclark81
Posts: 3
Joined: Wed Oct 09, 2019 12:49 am

Re: Geeetech extruder Extension Board connector

Post by trclark81 » Wed Oct 09, 2019 12:51 am

Does anyone know what cable I need for the connection from the GT2560 to the extruder extension board? And where I can get it?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech extruder Extension Board connector

Post by William » Wed Oct 09, 2019 9:04 am

Hi, You can contact your sales for consultation.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply