SOS GEEETECH A10M

Post Reply
ANGE
Posts: 7
Joined: Sat Jun 29, 2019 11:14 pm

SOS GEEETECH A10M

Post by ANGE » Sat Jul 13, 2019 5:34 pm

Bonjour à tous,

J'ai besoin d'aide svp.

Je n'ai plus rien qui s'affiche sur mon écran d'imprimante et elle bip en permanence quand je l'allume.

Joint photos .

Quelqu'un pour me dépanner ? SVP

Merci
Attachments
20190705_172936[1].jpg
20190705_172936[1].jpg (258.05 KiB) Viewed 6706 times
20190705_172932[1].jpg
20190705_172932[1].jpg (183.11 KiB) Viewed 6706 times

Geeeko
Posts: 26
Joined: Sun Feb 03, 2019 12:20 am

Re: SOS GEEETECH A10M

Post by Geeeko » Sat Jul 13, 2019 9:19 pm

Vérifier les connections des cables ?

ANGE
Posts: 7
Joined: Sat Jun 29, 2019 11:14 pm

Re: SOS GEEETECH A10M

Post by ANGE » Sun Jul 14, 2019 12:03 am

Tout à été verifier.
Je ne comprend plus rien.

Geeeko
Posts: 26
Joined: Sun Feb 03, 2019 12:20 am

Re: SOS GEEETECH A10M

Post by Geeeko » Sun Jul 14, 2019 9:33 am

Ca sent la grillade de composant ;/
Contacte Geeetech si elle est sous garantie, sinon, bon courage, peut être changer la carte mére ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: SOS GEEETECH A10M

Post by William » Mon Jul 15, 2019 9:43 am

Hi, you can reconnect the screen wiring. Does your motherboard have three lights normally lit?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ANGE
Posts: 7
Joined: Sat Jun 29, 2019 11:14 pm

Re: SOS GEEETECH A10M

Post by ANGE » Mon Jul 15, 2019 7:29 pm

Bonjour William,

Merci de m'avoir répondu.
Oui toutes les lumières sont allumées.
Apparament quand je l'allume elle ne bip plus, en revanche je n'ai toujours rien sur l'écran pour faire les réglages.
J'ai surement fait une mauvaise manipulation, je ne trouvais pas comment imprimer en deux couleurs car je n'ai pas trouvé la configuration A10M pour les deux couleurs, elle ne trouve pas la deuxieme extrudeuse.
Je suis perdue.
comment faire pour faire réaparaitre les informations sur l'écran ?

Cordialement.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: SOS GEEETECH A10M

Post by William » Mon Jul 15, 2019 7:53 pm

Hi, You can reconnect the screen cable, if you still can't, you can refer to this:http://www.geeetech.com/forum/viewtopic ... 23&t=17040
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply