Upgrade to 3-in-1 Hotend Extruder

Post Reply
Boraes
Posts: 8
Joined: Mon Jun 03, 2019 6:20 pm

Upgrade to 3-in-1 Hotend Extruder

Post by Boraes » Mon Jun 03, 2019 6:38 pm

Hi Guys,

I'm always very indecisive when it comes to purchasing upgrades as there are often so many options/types. I have my A10M on way to me and I'm wanting to upgrade the 2-in-1 hot end extruder to a 3-in-1. I've found a couple all of varying prices, examples below,I was hoping that someone could give me some guidance on what to look for or any suggestions of good options?

https://www.amazon.co.uk/Samje-Multi-Co ... 7594&psc=1

https://www.ebay.co.uk/p/Updated-Triple ... 2626101795

Thanks in advance for any help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrade to 3-in-1 Hotend Extruder

Post by William » Tue Jun 04, 2019 12:00 pm

Hi, you can choose the one you like because the functions are the same.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Boraes
Posts: 8
Joined: Mon Jun 03, 2019 6:20 pm

Re: Upgrade to 3-in-1 Hotend Extruder

Post by Boraes » Sat Jun 08, 2019 12:33 am

Excellent thanks :)

Post Reply