BLtouch issue...firmware update needed?

Moderator: vert

Post Reply
hwurzburg
Posts: 3
Joined: Fri Apr 26, 2019 3:20 am

BLtouch issue...firmware update needed?

Post by hwurzburg » Fri Apr 26, 2019 3:25 am

I just bought an A10 and its workin well....I also got a BLtouch z probe and have installed it according to the video referred to in my A10 user manual...
the probe tests on power up but auto home goes to a much higher position and there are no BLtouch related menu items on the LCD display so I am stuck....

Firmware is Marlin 1.1.8 dated 12/25/2017 board is GT2560 V3.3 firmware rev: v1.1 hw:v2.9

do I need to update the firmware, if so, where do I download it....and if I need to compile, where are the config.h and advance config.h files?

User avatar
William
Site Admin
Posts: 4652
Joined: Tue Jun 07, 2016 9:38 am

Re: BLtouch issue...firmware update needed?

Post by William » Fri Apr 26, 2019 2:41 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

hwurzburg
Posts: 3
Joined: Fri Apr 26, 2019 3:20 am

Re: BLtouch issue...firmware update needed?

Post by hwurzburg » Sat Apr 27, 2019 11:01 am

Thanks! I found the hex file finally and loaded it....BLtouch now working

User avatar
William
Site Admin
Posts: 4652
Joined: Tue Jun 07, 2016 9:38 am

Re: BLtouch issue...firmware update needed?

Post by William » Sat Apr 27, 2019 11:10 am

That is great! :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: BLtouch issue...firmware update needed?

Post by BR365 » Sat May 18, 2019 12:22 am

How can I update my A20M with the 3D Touch sensor firmware A20_V1.1.8_3d touch.hex ?

I downloaded the hex file, but how can I transfer it to the printer?

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: BLtouch issue...firmware update needed?

Post by BR365 » Sat May 18, 2019 2:40 am

I updated rhe hex firmware file with Cura.

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests