You can purchase it from Amazon.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Be aware of two things:
A10 and A10M using different nozzle types!
A10 using M6 thread
A10M using M7 thread (but not standard MK10!)
take care which M7 nozzle you are buying!
I was told that you can use standard MK10 nozzles, so I bought them on Amazon just to find out, that the nozzle comes with a much wider inner diameter (4mm) since it is designed to take a tube down to the very tip. (see the picture on those MK10 nozzles at amazon https://www.amazon.com/Extruder-Nozzle- ... way&sr=8-9 )
Since the A10M is using a 2in 1out printer head, you need to have a smaller inner diameter of approx. 2mm (like the original nozzles). I has to have a flat end on the thread side to seal to the heat block.
So I suggest that you only by nozzles which as similar to the originals:
https://www.aliexpress.com/item/Geeetec ... 3c00bvK8oG
Who is online
Users browsing this forum: No registered users and 7 guests