A10 Part cooling fan FIXED!!!! Thanks to combat341

Moderator: vert

Post Reply
axiom
Posts: 8
Joined: Wed Sep 05, 2018 10:33 pm

A10 Part cooling fan FIXED!!!! Thanks to combat341

Post by axiom » Tue Sep 25, 2018 2:40 am

This needs to be a sticky!!!!!

Kudos to combat341 for this

I thought that this needed to be a separate thread, rather buried in a post.

I did this and it works.

https://imgur.com/a/uPrCTsK

Thanks again combat341!!!!

AFewSkroosLoose
Posts: 37
Joined: Sat Sep 01, 2018 8:07 pm

Re: A10 Part cooling fan FIXED!!!! Thanks to combat341

Post by AFewSkroosLoose » Tue Sep 25, 2018 5:03 am

Agree! Many thanks. :D

mathiaskahn
Posts: 3
Joined: Tue Nov 27, 2018 6:15 am

Re: A10 Part cooling fan FIXED!!!! Thanks to combat341

Post by mathiaskahn » Mon Dec 17, 2018 6:23 am

Hello
Same problem with my new A10, with GT2560 v3.0 mainboard.
The extruder fan in not spinning, event at max (255) power.

I tested the mentioned solution with FAN_SOFT_PWM does not work.
The JP2 jumper does not seem to exist on that board (or I was not able to locate it).

Any idea ?
thanks,

mathiaskahn
Posts: 3
Joined: Tue Nov 27, 2018 6:15 am

Re: A10 Part cooling fan FIXED!!!! Thanks to combat341

Post by mathiaskahn » Mon Dec 17, 2018 6:56 am

Found same report here : https://www.geeetech.com/forum/viewtopic.php?t=61895
But proposed solution "play with the cables" like : https://www.youtube.com/watch?v=J8xEsue_Xa8
==> does not work"

Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests