A10 auto level sensor

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: A10 auto level sensor

Post by Gingko » Tue Sep 18, 2018 7:20 pm

Sorry, the red line seems to connect to VCC, let me confirm tomorrow! :oops:

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: A10 auto level sensor

Post by Gingko » Wed Sep 19, 2018 6:31 pm

brown--GND
red--VCC
need to do a little modification for the connector of 3 pins.

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: A10 auto level sensor

Post by Wolle82 » Wed Sep 19, 2018 7:04 pm

need to do a little modification for the connector of 3 pins.
Please... can U show us a complete working setup? No mistakes, please. I am confused now.

This image is from http://www.geeetech.com/wiki/index.php/ ... ing_Sensor:
Image

This is the board:
Image

So... can U please show EXACTLY how to connect? Don't change colours.

gdachs
Posts: 28
Joined: Fri Sep 21, 2018 3:49 am

Re: A10 auto level sensor

Post by gdachs » Fri Sep 21, 2018 4:47 am

You have to exchange red and orange.

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: A10 auto level sensor

Post by Wolle82 » Fri Sep 21, 2018 6:26 pm

So it looks like:

Code: Select all

Endstop connector:

VCC [red]       |   VCC   
Z_MAX [orange]  |   Z_MIN [white]
GND [brown]     |   GND [black]  
VCC             |   VCC   
Y_MAX           |   Y_MIN
GND             |   GND  
VCC             |   VCC  
X_MAX           |   X_MIN
GND             |   GND
Last edited by Wolle82 on Fri Sep 21, 2018 6:58 pm, edited 2 times in total.

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: A10 auto level sensor

Post by Wolle82 » Fri Sep 21, 2018 6:54 pm

Here is a picture of correct wireing:
3d_touch_a10.jpg
3d_touch_a10.jpg (302.08 KiB) Viewed 16835 times
Have fun!

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: A10 auto level sensor

Post by Wolle82 » Fri Sep 21, 2018 7:18 pm

Well now, when there is someone out there who can give us a cool or simple STL file for a 3DTouch mount for the Geeetech A10 it would be very nice! Maybe you have designed one yourself... Please share.

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: A10 auto level sensor

Post by Wolle82 » Wed Sep 26, 2018 3:31 pm


RepMike
Posts: 18
Joined: Tue Jul 04, 2017 6:06 am

Re: A10 auto level sensor

Post by RepMike » Sat Oct 06, 2018 4:50 am

Question - can anyone point me to a tutorial on how to setup a Capacitive Proximity Sensor with the Geetech A10? Can I use the connectors on the Extruder? If so, how are they being wired?
Thank you in advance

Wolle82
Posts: 48
Joined: Thu Sep 06, 2018 9:19 am

Re: A10 auto level sensor

Post by Wolle82 » Wed Oct 10, 2018 4:18 pm

The A10 has no extra connectors to connect the sensor at the hotend/extruder... you connect it to the Z endstop on the mainboard directly as I know.

Further there a 3 methods to connect it to the Z endstop:
1. directly connect the sensor (not recommended - voltage to low with 5V for the sensor. The sensor is about 6-36V.)
2. use an octocoupler (safest but more tricky - use 24V with the sensor, separated 5V from the mainboard for the signal)
3. use a voltage devider (easy and cheap - use 24V with the sensor and devide the voltage to 5V for the signal)

Hint:
When U want to use the voltage devider (3.) you should know that the sensor (LJC18A3-H-Z/BX) itself has a build-in resistor at 10kOhm. Use a 2.2kOhm resistor to devide the voltage from 24V to 4.5V. When U got an other sensor find out its resistor value first (if present). That should be the easiest way... And don't forget to solder the resistor first before you connect to the board!

Here is my mount: https://www.thingiverse.com/thing:3146974

Post Reply