Geeetech A10 firmware Marlin 1.1.9

Moderator: vert

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by ebam2014 » Tue Nov 13, 2018 2:22 pm

how do I do this?

User avatar
_kaktus_
Site Admin
Posts: 1255
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Geeetech A10 firmware Marlin 1.1.9

Post by _kaktus_ » Tue Nov 13, 2018 3:12 pm

Hello.
:mrgreen:

You need to look carefully at the controller board.
There is a mark on the top and bottom.

In my case it looks like this:
wycinek_GTM32Pro_vB.png
wycinek_GTM32Pro_vB.png (759.71 KiB) Viewed 2493 times
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 5315
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Wed Nov 14, 2018 12:17 am

_kaktus_ wrote:
Tue Nov 13, 2018 3:12 pm
Hello.
:mrgreen:

You need to look carefully at the controller board.
There is a mark on the top and bottom.

In my case it looks like this:wycinek_GTM32Pro_vB.png
Good idea of it! :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

gdachs
Posts: 28
Joined: Fri Sep 21, 2018 3:49 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by gdachs » Wed Nov 14, 2018 4:33 am

ebam2014 wrote:
Wed Nov 07, 2018 3:41 am
do all A10s have mega board?
I am not aware of an A10s made by Geeetech. There exists printers named A10s, but they are not made by Geeetech and seemed to be brandless.
So you might be in the wrong forum.

User avatar
William
Site Admin
Posts: 5315
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by William » Wed Nov 14, 2018 9:17 am

gdachs wrote:
Wed Nov 14, 2018 4:33 am
ebam2014 wrote:
Wed Nov 07, 2018 3:41 am
do all A10s have mega board?
I am not aware of an A10s made by Geeetech. There exists printers named A10s, but they are not made by Geeetech and seemed to be brandless.
So you might be in the wrong forum.
Maybe he means the A10 series printer :mrgreen:
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by ebam2014 » Wed Nov 14, 2018 2:34 pm

sorry should I have put A10's????????????? would that have helped!

gdachs
Posts: 28
Joined: Fri Sep 21, 2018 3:49 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by gdachs » Wed Nov 14, 2018 9:14 pm

ebam2014 wrote:
Wed Nov 14, 2018 2:34 pm
sorry should I have put A10's????????????? would that have helped!
Ah, it is the plural of A10, sorry for my message.

Gerald

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by ebam2014 » Thu Nov 15, 2018 4:12 pm

gdachs wrote:
Wed Nov 14, 2018 9:14 pm
ebam2014 wrote:
Wed Nov 14, 2018 2:34 pm
sorry should I have put A10's????????????? would that have helped!
Ah, it is the plural of A10, sorry for my message.

Gerald
lol just a simply misunderstanding... :D :D :D :D

T3ste
Posts: 3
Joined: Mon Nov 12, 2018 12:02 am

Re: Geeetech A10 firmware Marlin 1.1.9

Post by T3ste » Sun Nov 18, 2018 7:10 pm

Hello,

i have a brannd new A10 with filament detector. My board is a GT2560V3.
Is this firmware for all board revisions?
Can i use a 3D-Touch sensor with this firmware (without to change the source code)?
Is this firmware maintained at github?
Btw: Why i always have to set that the filament sensor in the printer settings to activate it (after every switch on the device)?
Thank you very much!

@Michael: thanks for making and sharing your firmware!

Best regards,
Tino

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: Geeetech A10 firmware Marlin 1.1.9

Post by ebam2014 » Sun Nov 18, 2018 7:38 pm

_kaktus_ wrote:
Tue Nov 13, 2018 3:12 pm
Hello.
:mrgreen:

You need to look carefully at the controller board.
There is a mark on the top and bottom.

In my case it looks like this:wycinek_GTM32Pro_vB.png
board is the gt2560 rev 6

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests