3D WIFI connect to the printer

Post Reply
syakov
Posts: 2
Joined: Thu Aug 23, 2018 12:41 am

3D WIFI connect to the printer

Post by syakov » Fri Aug 24, 2018 3:17 am

Hey.
3D WIFI connected. But I can not connect to the printer.
I have Anet A8.
Thank you .

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: 3D WIFI connect to the printer

Post by _kaktus_ » Fri Aug 24, 2018 12:47 pm

Hi
:mrgreen:

What installation steps have you already taken?
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

syakov
Posts: 2
Joined: Thu Aug 23, 2018 12:41 am

Re: 3D WIFI connect to the printer

Post by syakov » Fri Aug 24, 2018 3:09 pm

_kaktus_ wrote:
Fri Aug 24, 2018 12:47 pm
Hi
:mrgreen:

What installation steps have you already taken?
;)
I connected the Wi-Fi, my printers,printer profile,material profile.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: 3D WIFI connect to the printer

Post by _kaktus_ » Sat Aug 25, 2018 1:53 am

Hello
;)

I do not understand a bit. :roll:
In the first message you wrote that you are not able to establish a connection with the printer.

Is there a problem with this :?:

In the connection configuration (android application) you need to enter the correct baud rate.
Follow the user's manual.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

ebam2014
Posts: 40
Joined: Fri Nov 02, 2018 5:06 pm

Re: 3D WIFI connect to the printer

Post by ebam2014 » Sat Nov 03, 2018 8:51 pm

How do we connect the A10 to the wifi module what settings do I use?

Post Reply