Unable to log in on the app

PrintQUB
Posts: 2
Joined: Mon Jul 09, 2018 4:50 pm

Unable to log in on the app

Post by PrintQUB » Mon Jul 09, 2018 6:40 pm

Initially I tried to register an account in the app which seemed successful as it said a verification email had been sent, although i never received the email. I read a forum post which seemingly had a similar issue where someone replied that you needed to setup an account on geeetech.com. I set that up and have tried to log into the app but to no avail.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unable to log in on the app

Post by _kaktus_ » Mon Jul 09, 2018 11:34 pm

Hi
:mrgreen:

I logged in to my forum account.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

PrintQUB
Posts: 2
Joined: Mon Jul 09, 2018 4:50 pm

Re: Unable to log in on the app

Post by PrintQUB » Tue Jul 10, 2018 6:16 pm

Thanks for the reply.
Whenever I try to log in with my forum account it says "Login timeout" which puts me back to square one.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unable to log in on the app

Post by _kaktus_ » Tue Jul 10, 2018 10:53 pm

:cry:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Unable to log in on the app

Post by Gingko » Wed Jul 11, 2018 5:49 pm

PrintQUB wrote:
Tue Jul 10, 2018 6:16 pm
Thanks for the reply.
Whenever I try to log in with my forum account it says "Login timeout" which puts me back to square one.
You can PM your register email to Admin, they will delete your email address in the background, then you can try to register again.
Or use another email to register.

Alex-w
Posts: 148
Joined: Thu Jun 05, 2014 2:24 pm

Re: Unable to log in on the app

Post by Alex-w » Thu Jul 12, 2018 1:53 pm

Some of users cannot receive the email we sent for various reasons. Please PM me with your account and your app version. We will activate the account for you in a few minutes.

Bastius2000
Posts: 1
Joined: Mon Jan 21, 2019 3:43 am

Re: Unable to log in on the app

Post by Bastius2000 » Mon Jan 21, 2019 3:45 am

I also cant login or register i didnt get Thema Email

Moisesprint
Posts: 1
Joined: Tue Jan 22, 2019 1:45 pm

Re: Unable to log in on the app

Post by Moisesprint » Wed Jan 23, 2019 2:48 am

i haven't receive the activation email for the app.

Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: Unable to log in on the app

Post by Jarda3d » Sun Jan 27, 2019 7:26 am

MeeToo, tried 2 different phones and 4 email domains. Login from forum nor geetech did not works. Czech Republic, EU
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Unable to log in on the app

Post by _kaktus_ » Sun Jan 27, 2019 2:43 pm

Hi.
:mrgreen:

Most likely, all these problems are caused by the Chinese GFW blockage.

Have you already sent a notification about your problems :?:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply