About the three-color color mixing method of Color Mix

Locked
User avatar
Admin
Posts: 273
Joined: Wed Nov 30, 2011 9:49 am

About the three-color color mixing method of Color Mix

Post by Admin » Wed Nov 20, 2019 4:00 pm

About the three-color color mixing method of Color Mix

Hi, guys

something about the three-color mix software

Color mixing software for multi-mixing printer

Scope of application: win7/win8/win10

Supported gcode from:Slic3r, Cura, Easyprint3d and simplify3d. (Other gcode may support, but did not test)


Currently only available for Windows systems



the download link is :https://www.geeetech.com/download.html?download_id=40

and choose this:
(JWBPIBAMJ%DXLA9Z7O{Q~G.png
(JWBPIBAMJ%DXLA9Z7O{Q~G.png (88.3 KiB) Viewed 11824 times
Note: When the gocde file you loaded is wrong,
There may be a loading error or a software flashback


such as:
GGB`@]0259TDOBM${QPX9T0.png
GGB`@]0259TDOBM${QPX9T0.png (189.82 KiB) Viewed 11824 times
you can refer to this
ITL$%@E$KWKR_X1~(I%07]H.png
ITL$%@E$KWKR_X1~(I%07]H.png (30.31 KiB) Viewed 11824 times
Specific operation method:

TGBM)KM{)Z%TKWN9TMUK4VP.png
TGBM)KM{)Z%TKWN9TMUK4VP.png (34.95 KiB) Viewed 11824 times
wow,enjoy!

ThomasGee
Posts: 17
Joined: Mon Oct 14, 2019 8:56 pm

Re: About the three-color color mixing method of Color Mix

Post by ThomasGee » Wed Dec 18, 2019 10:31 pm

Every time I click on "mix color" the programm crashes without errormessage.

tried on twi systems
Win 10 1909 x64

gcode generated with Cury 4.4.0

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: About the three-color color mixing method of Color Mix

Post by William » Thu Dec 19, 2019 9:17 am

Hi, If so, it may be caused by a gcode error,
When you slice it you need to turn off z hop.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pawien
Posts: 27
Joined: Thu Dec 27, 2018 2:25 am

Re: About the three-color color mixing method of Color Mix

Post by pawien » Fri Dec 20, 2019 5:31 pm

turn off z hop ??

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: About the three-color color mixing method of Color Mix

Post by William » Fri Dec 20, 2019 5:49 pm

Hi, Extra ups and downs can interfere with the analysis.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: About the three-color color mixing method of Color Mix

Post by Jarda3d » Tue Dec 31, 2019 3:37 am

I did not use color mixer (done in gcode by hand)...

But Z-hop 0.1mm is very needed for mixing extruder, at least at A10M. Try my actual profile, it was massive updated and you did not need to remove discs in hotend assembly. Sample gcode included for untouched printer (E-steps 340). Try to print the sample on A10T (with 340 Esteps of course).
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

Locked

Who is online

Users browsing this forum: No registered users and 28 guests