Wiki for this board????

Post Reply
Kite79
Posts: 0
Joined: Thu Jan 04, 2018 10:00 pm

Wiki for this board????

Post by Kite79 » Thu Apr 26, 2018 7:00 pm

Hi all where i can find Wiki for this main board?
[attachment=0]board.jpg[/attachment]
i need it for find Zmin and Zmax pin for connect 3d Touch Auto levelling sensor...
Please help me
Attachments
board.jpg
board.jpg (88.69 KiB) Viewed 986 times

User avatar
_kaktus_
Site Admin
Posts: 365
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Wiki for this board????

Post by _kaktus_ » Sat Jul 21, 2018 2:07 am

In fact, the Geeetech wiki will not describe this version of the Controller Board. This should be complemented.

Or at least the differences and amendments should be presented. ;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer
bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer
bought 2018-04-15, He got new life.

Gingko
Site Admin
Posts: 188
Joined: Tue Apr 24, 2018 10:43 am

Re: Wiki for this board????

Post by Gingko » Tue Jul 24, 2018 3:04 pm

You can see the mark near the slot.
4.jpg
4.jpg (10.35 KiB) Viewed 453 times
The 3D Touch should be wired like this.
GT2560 RevB+3D Touch.jpg
GT2560 RevB+3D Touch.jpg (323.11 KiB) Viewed 453 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest