While Printing Nozzle Stops, Display shows "M105"

Post Reply
Freisl
Posts: 1
Joined: Wed Apr 03, 2019 3:47 am

While Printing Nozzle Stops, Display shows "M105"

Post by Freisl » Wed Apr 03, 2019 4:36 am

Hello,
since one month im the owner of the Mc2. All good so far.
Today the first problems.

I use Ultimaker Cura 3.6.0.

What happens....


1.Starting to print
2.after a while the nozzle Stops and u can see in the Display of the Printer the command "M105"
3.So if i do nothing the print is not continueing.
4.So i press the Button near the Display. Printer continues with the print.

This behavior is new, what is it?
Before i had 2 prints, each of them was 20hrs with no Stop....

Is Cura sending for some reason the Command "M105" for getting the extruder Temp? Maybe becaus of a lost Signal while printing(for example temperature Sensor broken)?

Greetings Chris

User avatar
William
Site Admin
Posts: 4172
Joined: Tue Jun 07, 2016 9:38 am

Re: While Printing Nozzle Stops, Display shows "M105"

Post by William » Wed Apr 03, 2019 8:14 pm

You can attach the gcode file(The forum support zip type file).
Then we can help to check it.
Or you can use the slic3r to slicing it then test it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests