Replacement parts - cable and fan

Post Reply
Drawler
Posts: 0
Joined: Tue Jun 13, 2017 10:07 am

Replacement parts - cable and fan

Post by Drawler » Thu Apr 12, 2018 4:57 pm

Hello, I'm Vicente Martinez, from Spain.

I ordered a Mecreator 2 3D printer on May, 2017, via Amazon (order 407-8204653-8865903, 4th of may, 2017) and It has been working ok lately.

I have some problems with two pieces. The fan has been broken and I can't find for a replacement with the same 3-pin connection. (other fans available online have bigger connections and don't fit)

Is there any possibility of buying / ordering a new 3-pin fan?

There's a photo of the broken fan:

https://imgur.com/aDO7F2Z

In case there is no way of ordering a new fan. ¿what is the 3-pin connector type? JST 2.0? JST-ph? JST-XT?


Another important issue is the cable connection between the main body and the extruder. It has a broken contact. I fixed it temporally by a smal welding, but I would like to get a new intact cable.

You can se the cable at these photos:

https://imgur.com/IRr1GkM
https://imgur.com/kKiQUHn
https://imgur.com/M9iXATB

Is there any way of getting a new cable? It is a very important issue for me.

Again, if I can't order it... what's the denomination of the cable for ordering at an electronics shop? It's a 12-pin cable but I don't know the connector type name.

Thank you very much in advance.

Regards,

Vicente

toffetto
Posts: 2
Joined: Sun Jun 24, 2018 8:50 pm

Re: REPLACEMENT PARTS - CABLE AND FAN

Post by toffetto » Sun Jun 24, 2018 8:52 pm

Hi, did you find it?
I need it too!!!

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: REPLACEMENT PARTS - CABLE AND FAN

Post by Gingko » Wed Jun 27, 2018 3:55 pm

toffetto wrote:
Sun Jun 24, 2018 8:52 pm
Hi, did you find it?
I need it too!!!
What's your printer model, also Mecreater 2?
This printer needs a 24V fan.

matt_ch
Posts: 2
Joined: Mon Jul 30, 2018 11:24 pm

Re: REPLACEMENT PARTS - CABLE AND FAN

Post by matt_ch » Tue Jul 31, 2018 1:23 am

Gingko wrote:
Wed Jun 27, 2018 3:55 pm
What's your printer model, also Mecreater 2?
This printer needs a 24V fan.
Why 24V ? Picture says 12V, 0.09A, 3Pin, 40x40x10mm. Looks like the extruder fan (not the part cooling one - which has PWM).

According to Geeetech-Wiki (http://www.geeetech.com/wiki/index.php/GT2560), the fan 1-3 connections work with 12V. The PWM-fan is not specified (but may be 12V pk too ?).

Or is there something wrong ? Have you measured it ?

8ung
Posts: 17
Joined: Thu Feb 23, 2017 2:08 am

Re: REPLACEMENT PARTS - CABLE AND FAN

Post by 8ung » Thu Jan 24, 2019 2:54 am

Drawler wrote:
Thu Apr 12, 2018 4:57 pm


There's a photo of the broken fan:

https://imgur.com/aDO7F2Z

In case there is no way of ordering a new fan. ¿what is the 3-pin connector type? JST 2.0? JST-ph? JST-XT?


works perfect
https://de.aliexpress.com/item/3-Pin-40 ... 2e0eljgNay

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest