Calibration Error Help Coronavirus

Post Reply
LoxlyStorm
Posts: 4
Joined: Tue Mar 31, 2020 10:11 pm

Calibration Error Help Coronavirus

Post by LoxlyStorm » Tue Mar 31, 2020 10:21 pm

Hello,

We are printing FaceMasks for hospitals. I am getting the following disadjustment on them, attach picture.
As am not used to print in my 3D, I do not want to touch if I am not sure it will improve the printing.

Could some one please help me to adjust X Y axis ( I think it is the problem)

Best regards
Attachments
20200331_122359.jpg
20200331_122359.jpg (199.79 KiB) Viewed 10018 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Calibration Error Help Coronavirus

Post by William » Wed Apr 01, 2020 9:45 am

Hi, Is your print model too big,
Beyond the print range,
Before printing, you need to level the hot bed.
The distance between the nozzle and the hot bed is a sheet of leveling paper.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

LoxlyStorm
Posts: 4
Joined: Tue Mar 31, 2020 10:11 pm

Re: Calibration Error Help Coronavirus

Post by LoxlyStorm » Wed Apr 01, 2020 7:08 pm

Dear William,

The model is big but I have no error to be out of range.
Yes, I calibrate with a paper and hot bed is ok, it prints good.
But it seems that X axis and Y axis is not well adjusted because curve is different in each side.
As you can see in the image.
Any idea?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Calibration Error Help Coronavirus

Post by William » Thu Apr 02, 2020 9:08 am

Hi, you can adjust the belt of the x/y axis.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

LoxlyStorm
Posts: 4
Joined: Tue Mar 31, 2020 10:11 pm

Re: Calibration Error Help Coronavirus

Post by LoxlyStorm » Fri Apr 03, 2020 3:50 pm

Dear william,

I tight the belt of Y axis and now it works.

Thank you very much!!!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Calibration Error Help Coronavirus

Post by William » Fri Apr 03, 2020 3:54 pm

:D enjoy print.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply