Power Supply Issues

Post Reply
mgray_121
Posts: 1
Joined: Mon Apr 22, 2019 7:36 am

Power Supply Issues

Post by mgray_121 » Mon Apr 22, 2019 7:51 am

I have fully assembled the I3 Pro W but when i turn it on the power supply the led light (on the power supply) blinks green and makes a clicking sound. On the motherboard side the two led lights also blink green and nothing works. I thought maybe i had something was wired wrong but i've checked over the wiring and everything seems to be correct. The control panel lights up when i plug it into my computer but nothing else. I couldn't find anything about this problem online/the forum.

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Power Supply Issues

Post by Tomyuan » Mon Apr 22, 2019 11:05 am

I think you need a multimeter.
You can use it to check the PSU output it 12V or not.
If the voltage is correct then you need to check the wires is correct.
;)

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Power Supply Issues

Post by _kaktus_ » Mon Apr 22, 2019 4:54 pm

Hi.
:mrgreen:

Tomi
this symptom indicates that the PSU is not working properly.
There is a short circuit in either the output circuit or the power supply has a defect.
:roll:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Power Supply Issues

Post by Tomyuan » Tue Apr 23, 2019 9:34 am

Hi,kaktus
:D If he/she can use the multimeter then the problem will be easy to be checked.

Fluxcore
Posts: 22
Joined: Thu Mar 31, 2016 10:47 am

Re: Power Supply Issues

Post by Fluxcore » Wed Apr 24, 2019 6:28 am

Did you check the 220/115 ac switch ?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest