Extruder going in the wrong direction

Post Reply
awestom
Posts: 13
Joined: Sun Mar 17, 2019 1:00 pm

Extruder going in the wrong direction

Post by awestom » Tue Mar 19, 2019 5:04 am

Hi guys,



At a loss on why my extruder is pushing the filament out instead of 'sucking' it in.

Code: Select all

 - Flashed the firmware and set
 - - #DEFINE INVERT_E0_DIR true
 - - #DEFINE INVERT_E0_DIR false
 - - - I also set all extruders to true/false
 - Swapped the plug around
 - Tried different printing software


Does anyone else have any other ideas?

All of those methods above result in my extruder pushing the filament out.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder going in the wrong direction

Post by William » Wed Mar 20, 2019 2:28 pm

You need to refer to the FAQ for the I3 type printer.
It will show you how to change the dir of the motor.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply