Ooops!!!

Post Reply
keyser187
Posts: 28
Joined: Mon Jan 22, 2018 9:28 am

Ooops!!!

Post by keyser187 » Sat Oct 13, 2018 6:46 am

Tried to drill out the hole to 8mm as it was under and had to hammer the threaded rods in.
:o :shock: :?
It didn't work!, I won't be printing for a while
but thank %#&% RDR2 is out in a few weeks.
Attachments
20181012_233447177~2.jpg
20181012_233447177~2.jpg (212.57 KiB) Viewed 5797 times

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Ooops!!!

Post by Gingko » Tue Oct 16, 2018 5:33 pm

The 8mm hole didn't fit the threaded rods so that you have to drill it?

keyser187
Posts: 28
Joined: Mon Jan 22, 2018 9:28 am

Re: Ooops!!!

Post by keyser187 » Thu Oct 18, 2018 10:44 pm

the 8mm hole in the coupler was under size ( 7.8-7.9) so the threaded rod was a very tight fit which i had to force in.
so i tried to drill it to 8mm :? went in ok but snapped coming out.
recently upgraded to lead screws and new black couplers 8-)
but now i managed to snap a pin on the y axis end stop :evil:. Does anyone know which end stop i need to buy to fit the GT2560 as it only has 2 pins and the ones im finding on amazon and geeetech site are 3 pins and dont look like they will fit where my old ones are placed?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Ooops!!!

Post by _kaktus_ » Fri Oct 19, 2018 1:21 am

Hello.
:mrgreen:

For a new topic you should create a new post.

With limit switches it is so:
  • 3 pins
    You can select the type of action,
    1 - disconnects 2 outputs after switching,
    2 - after switching connects 2 outputs.
  • 2 pins
    You have no choice of functionality,
    It works only in one way, its type you have to choose when you buy it.
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

keyser187
Posts: 28
Joined: Mon Jan 22, 2018 9:28 am

Re: Ooops!!!

Post by keyser187 » Fri Oct 19, 2018 8:43 pm

Apologies, ill make a new post.

Post Reply