Power Supply Problem

Post Reply
kavsnzre
Posts: 1
Joined: Mon Jun 11, 2018 9:18 pm

Power Supply Problem

Post by kavsnzre » Mon Jun 11, 2018 9:35 pm

Hi all,
I just mounted the printer, following the pdf and video instructions. But when I try to switch on the printer, the current turn at my home.
But my wiring scheme is exactly the same as the one shown into the instructions! Please, could you help me to understand the problem?

I attach the photos.

The PSU:
Image

The ON/OFF:
Image

When i put the plug into the wall the ON/OFF switch lights (even if it is OFF!):
Image

If I try to swith ON, the current goes down, everywhere in my home (the green light of the PSU turn ON for a while).

Please help me, best regards,
Michele

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Power Supply Problem

Post by _kaktus_ » Tue Jun 12, 2018 12:21 pm

Symptoms appear to be an installation error. But if you have connected everything correctly, it can be a sign of a damaged power supply.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply