Board Version question

Post Reply
EGRC
Posts: 2
Joined: Wed Jul 04, 2018 12:44 am

Board Version question

Post by EGRC » Wed Jul 04, 2018 12:47 am

I have a Geetech i3 (i believe it is a c).
Where is the board identified?
I want to add a bltouch to this unit and want to know the correct board version (so i know i have correct information for firmware and pins)

Thank you for any assistance.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Board Version question

Post by _kaktus_ » Wed Jul 04, 2018 1:00 pm

:mrgreen:
Take a closer look at the Controller Board.
In the vicinity of the microcontroller, on PCB there are inscriptions informing about the controller's board version.
;)
The large, legible inscription is also located on the underside of the PCB.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply