The correct assembly instructions

Post Reply
SL01
Posts: 0
Joined: Sat May 12, 2018 1:44 pm

The correct assembly instructions

Post by SL01 » Sat May 12, 2018 2:21 pm

Hello,
Is this http://www.geeetech.com/wiki/index.php/ ... nstruction
the correct assembly instructions page ?
I ask because I am on step 1 and I have already noticed 2 errors.

SL

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: The correct assembly instructions

Post by _kaktus_ » Mon May 14, 2018 12:36 pm

[quote=SL01 post_id=84150 time=1526106072 user_id=65575]
Hello,
Is this http://www.geeetech.com/wiki/index.php/ ... nstruction
the correct assembly instructions page ?
I ask because I am on step 1 and I have already noticed 2 errors.

SL
[/quote]

Take this manual as a hint. Follow common sense when building.
This is the DIY design and it is good to do something according to your idea. :D

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: The correct assembly instructions

Post by Gingko » Mon May 14, 2018 6:35 pm

[quote=SL01 post_id=84150 time=1526106072 user_id=65575]
Hello,
Is this http://www.geeetech.com/wiki/index.php/ ... nstruction
the correct assembly instructions page ?
I ask because I am on step 1 and I have already noticed 2 errors.

SL
[/quote]

What the errors look like?
could you show up more details?

SL01
Posts: 0
Joined: Sat May 12, 2018 1:44 pm

Re: The correct assembly instructions

Post by SL01 » Tue May 22, 2018 2:35 am

[/quote]

Take this manual as a hint. Follow common sense when building.
This is the DIY design and it is good to do something according to your idea. :D
[/quote]

I agree but I worry about not having enough parts if the instructions do not match the kit after many hours of work.

SL

SL01
Posts: 0
Joined: Sat May 12, 2018 1:44 pm

Re: The correct assembly instructions

Post by SL01 » Tue May 22, 2018 2:44 am

[/quote]

What the errors look like?
could you show up more details?
[/quote]

Most of the Part ID do not match my kit. I make corrections as I work but it takes more time so i wanted to confirm.

My kit has a metal extruder holder (X carriage) (M3) which is very different from the instructions. Fortunately, the Youtube videos (https://www.youtube.com/watch?v=RL2ELVk ... 3yLrUDpCZC) are a good match.

The is no mention in the instructions about 51A (endstop trigger). I am guessing it goes on the extruder holder (X carriage).

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: The correct assembly instructions

Post by Gingko » Tue May 22, 2018 3:13 pm

[quote=SL01 post_id=84274 time=1526928276 user_id=65575]

Most of the Part ID do not match my kit. I make corrections as I work but it takes more time so i wanted to confirm.

My kit has a metal extruder holder (X carriage) (M3) which is very different from the instructions. Fortunately, the Youtube videos (https://www.youtube.com/watch?v=RL2ELVk ... 3yLrUDpCZC) are a good match.

The is no mention in the instructions about 51A (endstop trigger). I am guessing it goes on the extruder holder (X carriage).
[/quote]

The endstop(of X-axis) is mounted on the top of the X-axis motor end.
It is shown in the attached file, although this building instruction also needs to be updated, too.
But it's more clear than Wiki.
Attachments
Pro C building_instruction.rar
(19.89 MiB) Downloaded 449 times
3.jpg
3.jpg (38.63 KiB) Viewed 9966 times

SL01
Posts: 0
Joined: Sat May 12, 2018 1:44 pm

Re: The correct assembly instructions

Post by SL01 » Thu May 24, 2018 11:59 pm

[quote=Gingko post_id=84280 time=1526973239 user_id=65378]
[quote=SL01 post_id=84274 time=1526928276 user_id=65575]

Most of the Part ID do not match my kit. I make corrections as I work but it takes more time so i wanted to confirm.

My kit has a metal extruder holder (X carriage) (M3) which is very different from the instructions. Fortunately, the Youtube videos (https://www.youtube.com/watch?v=RL2ELVk ... 3yLrUDpCZC) are a good match.

The is no mention in the instructions about 51A (endstop trigger). I am guessing it goes on the extruder holder (X carriage).
[/quote]

The endstop(of X-axis) is mounted on the top of the X-axis motor end.
It is shown in the attached file, although this building instruction also needs to be updated, too.
But it's more clear than Wiki.
[/quote]

That is for 56 (endstop) but I was inquiring about 51A (endstop trigger). Fortunately, this intruction file you posted does confirm my guess on page 51. Thanks for the file and your help!
Attachments
51A_Location.jpg
51A_Location.jpg (41.84 KiB) Viewed 9910 times

Post Reply